i just put a set of 2011 Road glide rear signals on my 05' super glide they are 3wires 2 element bulbs what do i need to do to tie them into my brake lights but still keep them as running lights also

 

3 wire lights are for the front, rear lights don't have running lights unless you install the run/turn/brake module.

 

is that all i need to do is just the module,to have the brake lights thru the turn signals also,i want to put the red lens caps on also

 

the rear lights are tied into the running lights now,i just want to tie the brake light into them also

 

You have to get the modual. They are single filiment bulbs.

 

the tail lights on there now are off from an 11' road glide they are 3 WIRE
2 ELEMENT BULBS now,i guess all i need to do is call the dealer for the correct module

 

LOL I'll post up a schematic.

 

You'll still have the wrong lights.

 

You may need to get different bulbs... However, once you have the correct bulbs all you need to make em do what you want is a run/turn/brake module. I recently bought one off ebay for about $25 + shipping and it plugs right in. Extremely easy.

 

Single filament bulbs do not fit where dual filament bulbs belong.