Anybody know the part numbers for the 05 rims with the 1" axel?

 

The 3/4" will work as well, just gotta swap bearings and sleeves.

 

Just a quick note and something to think about. The HD slotted six spoke wheels would give a similar look if powdered black and also support dual discs. A lot less work since they bolt right up

 

cool. so then any oem 13 spoke mag will work? are there any differences between the sportster and dyna mags? different years? i want to try and pick some up at a swap meet so i want to make sure i dont get something that wont fit

 

Just make sure they are 2000 or newer, need to be setup for sealed bearings, the older ones had the old school bearings that had to be packed with grease every so often

 

okay guys im back in the game with some 13 spoke wheels again...this time i got the two toned black and polished wheels...

next will be getting the wheel bearing kits and some front spacers then some tires..

 

Those 2 tone wheels look awesome! Good luck with the swap!

 

thanks man! Youve already helped me out a lot...

 

Bit of an update on the front wheel spacers. They work significantly better machined to 1.1" (On the nut side) and 1.22". With the old measurements the spacers weren't quite as tight as they should be with my fork brace installed. The new set up works perfectly.

 

....09/04/12 updated the first post....