Is there anyone in Oregon or SW Washington that has done the conversion and wouldnt mind giving me a hand. I was trying to go off the directions i found on here but each time i try, there is one set that is either too long or too short...

Also, could it be that the Jireh 21x2.15 doesnt lace the same as the wider 21 that most people on here seem to be running?

 

From what ive read, only the wider 21" inch rim from jireh cycles will work with the stock hub and spokes.

 

The 21x3.25 is a deep drop center and the shorter spokes work.

The 21x2.15 is more than likely not, probably going to need new spokes and will probably be lacing a standard 1 over 4 as opposed to the 1 over 3 you use when doing the wider wheel