forward controls
#3
01-13-2012 | 04:59 PM
Ultimate HDF Member
Joined: Feb 2006
Posts: 6,662
Likes: 579
From: South Florida
Just put a set of HD forward controls on my 2012 Dyna Custom.Got 20% discount by using one of the many online Harley dealers who offer this discount.That makes the HD kit the lowest price and everything fits I cut my factory shift lever off from the backside of the inner primary which saved pulling the inner primary off.I did not change the trans shift lever to the kits longer lever and have had no problem with finding neutral or shifting.The kit comes with all the gaskets and trans lever if you want to pull the inner primary off.It was a 2 hour job including cutting the shifter shaft.
#6
01-14-2012 | 01:46 PM
Cruiser
Joined: Nov 2008
Posts: 107
Likes: 3
http://www.harley-davidson.com/gma/g...bmLocale=en_US
#7
01-16-2012 | 09:22 AM
Club Member
Joined: Jul 2010
Posts: 270
Likes: 1
From: NoVa
I had the HD forwards and went to the Kury +3 extended forwards. Both seem excellent and sturdy. The Kury's seem a bit beefier to me.
Note, of course, that the extended won't work with an engine guard while the HD's did. Love the Kury's around town. Would like the engine guard/hiway pegs back for 500+ mile runs. Too much work to swap em back and forth though.
Note, of course, that the extended won't work with an engine guard while the HD's did. Love the Kury's around town. Would like the engine guard/hiway pegs back for 500+ mile runs. Too much work to swap em back and forth though.
