Red key light on and bike won't start
#1
Red key light on and bike won't start
My red security key light came on this morning while I was coasting down a hill at around 10 mph. It was early in the morning so the bike was not running but the key was in the ignition and the run switch was on. I was trying to stay quiet for the neighbors and this is the thanks I get! I looked at the fault codes and I came up with B1155. I also saw PN 68921-07 but I don't know what that is for. Another thing to mention is that I do not have the slarm system or the remote FOB starting system. Any help to get my bike running would be greatly appreciated!
#5
So what is the DIY fix on this? I tried the reset that I read in the manual of alternating the ignition from off to on three times but it didn't work. I'm stationed in germany and the closest dealer is over 2 hours away. Thanks
Last edited by The Ground Truth; 08-17-2011 at 03:47 AM. Reason: added info
#6
#7
Trending Topics
#8
I get that a lot. Makes me laugh. I have an '11 and I don't need nor have the fob. No alarm. It's an option, not standard. My bike didn't have that option when it was on the showroom floor, and I wanted to ride it home the minute I saw it.
So, just to be clear, not all new bikes come with the security and the fob.
So, just to be clear, not all new bikes come with the security and the fob.