Let's keep track of our Superglide Mods
#42
I chose the V&H, since they have an optional "quiet" baffle (around $30, I believe), if they still seemed too loud. I think I'm gonna like them just the way they are. loud...but not obnoxious.
#43
#44
The SE slip-ons are way differant than stock. with the stockers on my bike it was like a Honda quite it had a lot of baffling in it. the SE are almost straight with a cone piece of metal in it. loud but not obnoxious.
#45
Here are a couple pics of what once used to be my Super Glide. Not sure what the hell it is now. I just call it Thing. It was bone stock when I brought it home. Its gone through a couple different looks now until i ended up with this. yeah I know, why didn't you just buy a street glide? Well not only did I not have the cash for one when i was going up to a bigger bike, but I didn't know I wanted one at the time. Actually a Road Glide will probably replace this some day.
On it now:
Memphis Shades batwing w/ 7" shield
Rinehart exhaust
Dobeck EFI controler
HD touring seaat
Avon grips
HD hard locking bags
HD sissy bar and 12" pad
Krome Werks Narrow sweeper bars
7" headlight
HD blinker relocation
Rear blinker relocation w/ lay back plate
Arleness Big sucker
Highway bar w/ HD long adjustable highway pegs
Motherwell lugage rack
Kuryakyn iso pegs
Cycle sounds 2" speaker system
Bag on the battery box
Street Glide air shocks
Things to come:
Cams
Possibly a different programmer
Paint lower forks black
Possibly paint wheels, black or maybe a metallic charcoal grey, or not.
Replace the black MW luggage rack with a chrome one. had to get the black one on short notice for a trip.
On it now:
Memphis Shades batwing w/ 7" shield
Rinehart exhaust
Dobeck EFI controler
HD touring seaat
Avon grips
HD hard locking bags
HD sissy bar and 12" pad
Krome Werks Narrow sweeper bars
7" headlight
HD blinker relocation
Rear blinker relocation w/ lay back plate
Arleness Big sucker
Highway bar w/ HD long adjustable highway pegs
Motherwell lugage rack
Kuryakyn iso pegs
Cycle sounds 2" speaker system
Bag on the battery box
Street Glide air shocks
Things to come:
Cams
Possibly a different programmer
Paint lower forks black
Possibly paint wheels, black or maybe a metallic charcoal grey, or not.
Replace the black MW luggage rack with a chrome one. had to get the black one on short notice for a trip.
#47
#48
For the guys with superglide customs with drag bars. Is it more comfortable with them on after taking off the buckhorns? Did your hands get closer to you or did it get even further out.
I'm asking because I want to do this setup but with 5.5 pullback risers and flanders 35degee bend drag bars. I have a short reach of 20" front pit to palm and a 24" reach from pit to tip of my fingers.
Flanders 35 degree bars have about 10" pullback and the stock pullback of the buckhorns are about 11" I dont want to buy these bars and risers and end up getting the same pullback with my stock bars.
Im trying to emulate the fatbob look with the chorme bars and black risers. Or should I do both black bars and risers?
Thanks
I'm asking because I want to do this setup but with 5.5 pullback risers and flanders 35degee bend drag bars. I have a short reach of 20" front pit to palm and a 24" reach from pit to tip of my fingers.
Flanders 35 degree bars have about 10" pullback and the stock pullback of the buckhorns are about 11" I dont want to buy these bars and risers and end up getting the same pullback with my stock bars.
Im trying to emulate the fatbob look with the chorme bars and black risers. Or should I do both black bars and risers?
Thanks
#49
Can't say what will work for you but I took off the buckhorns and went to FXDL bars on the stock risers which put me leaning forward and that was just what I wanted - much more comfy. When I put on the FB front end I went with Fat Boy Lo bars and risers which are in similar forward leaning postion and like them as well.
#50
Has anyone here installed Handlebars with internal wiring properly without cutting the wires in the handlebar controls?
My SuperGlide buckhorns came with dimples and after reading the service manual. There were 2 ways of doing them.
1. Cut the wires from the handlebar controls
2. Individually take each corresponding wire from the harness. Then reroute from there.
Im guessing option 2 would suck. But my assumptions is that everybody else just cut the wiring and hide it in the controls or run the splices through the bars.
Thanks
My SuperGlide buckhorns came with dimples and after reading the service manual. There were 2 ways of doing them.
1. Cut the wires from the handlebar controls
2. Individually take each corresponding wire from the harness. Then reroute from there.
Im guessing option 2 would suck. But my assumptions is that everybody else just cut the wiring and hide it in the controls or run the splices through the bars.
Thanks