I just had the JAGG 10 Row Oil Cooler installed. Product # 3140 High Mount. Absolute top notch quality. I spoke directly with Marvin at Setrabusa - the JAGG distributor.

I had originally wanted the JAGG oil cooler that mounts to the lower front motor mount, which I believe is the most unobtrusive oil cooler, however, I am running a True Track and wasn't sure if I would be able to make it work as the True Track utilizes the front motor mount also.

I plan on eventually swapping out the oil lines to black braided steel lines, but will probably wait until my next oil change. I'd like the lines to be a little longer so that I can strap them to the down tubes.

Sorry for the poor picture quality.

Thanks for looking.

 

Looks good. Very functional mod. I have the slim line side mount on mine very well made.

 

Very cool. I gotta believe that is nothing but good. Have you guys noticed an oil temp drop? What was the price?

 

thats my next mod before the temps explode here in Vegas. Probably gonna run the vertical mount one though.

 

I know people say you don't need them but I don't care. They have to be a good idea. I always had one on every one of My Shovels, and sooner or later I will get on on my Evo.

 

These motors don't run hot. That's why there are oil cooling jets in the wrist pin area to cool the tops of the pistons and the motors have a heat management system in the ECU program. Oil coolers are insurance for your motors.

 

Looks good there. Probably a little cooler air mounted higher on the frame too. Need to get me one of those.

 

I know this is an old thread, but where did you buy the mount to mount it high up like that? I have the low mount one and just bought a skid plate I am going to put on so I need to either relocate this one or get a side mounted one.

 

Not sure about that mount, but you could always get the mount from Harley that mounts the cooler vertically. That's what I did, you can see it in this pic. It's on the front left down tube...

 

Thats the one I was looking to buy. I dont have that actual cooler though so I would have to buy the whole set up. I have a low mount 10 row cooler and was just looking for a way I could still use this one and just relocate it.