Tins installed - photos
#12
So many times fellas willl bolt on a conglamoration of parts that just does NOT work....However occasionally a fella will figure out just the right items to bolt together and when they come together they are classy... Well, your bike is very nicely put together, and I say its one fine steed....
Great job
Great job
#14
Thanks all, for the kind words ....
Robtarra (and other suggesting it) - I had thought of blacking out my cylinders and heads when I did my big bore ... I still think it's a good idea and may do it eventually ... my bike is an '05 FXDI, stock rake should be the same as yours .... Only issue I had was the front end was kind of soft (bottomed out and crushed the back of the front fender on my engine guard cross bar) so, I replaced the springs with stiffer Race Tech springs and Gold Valve cartridge emulators ....
lo-rider - I think one of the reasons the second posting was not that great is that they were just a couple of screen shots from the video I did (and seem to be a little less clear) ...
... speaking of which ... below is a video I posted to youtube of a walk around ....
http://www.youtube.com/watch?v=zCcMcTK6FVE
lo-rider - I think one of the reasons the second posting was not that great is that they were just a couple of screen shots from the video I did (and seem to be a little less clear) ...
... speaking of which ... below is a video I posted to youtube of a walk around ....
http://www.youtube.com/watch?v=zCcMcTK6FVE
Last edited by SURFOR Chop; 03-17-2011 at 08:08 AM.
#16
#18
#20
You've brought that thing a long way, and it looks fantastic. Kudos to Joe on the P/C work. Like I've said before, it's amazing that yours and the one in my sig were twins a few years ago. BTW-I'm with the rest that say you need to give your jugs the Nazman treatment and spray them black.
Last edited by Dawg Rider; 03-17-2011 at 07:31 AM.