I cut mine off and relocated it between my rear cylinder and battery.

 

I scuffed mine up with sandpaper and then wrinkle coated it black with rattle can from auto parts store (just followed directions on the can). I have read where others have done the same but used self etching primer before painting. I wasn't aware of the primer at the time, but we'll see how long it lasts like this. No problems as of yet. Thinking of doing the belt guard next.

 

Havent taken the cow bell off yet but mine is mounted under the seat between the battery & elec. box.

 

DMF - I've had the horn on for about a year and a half now and haven't noticed any degradation. It'll still get a cager's attention PRONTO!

 

I had a walo, it quit working so I got the Harley air horn. I've had some problems with the wire connector comeing lose. Other than that it will make a kid with a getto blaster wet his pants. I like the noise, It's chrome so it sont look to bad but it can honk.

 

I like smooth horn from HD.

 

I bought a derby cover of this guy on e-bay and I love it nice work as well I do plan on buying a horn cover from him as well bu I have to figure out what I want...
here is a link for him

http://shop.ebay.ca/shields38/m.html...id=p4340.l2562

 

I think this is the best looking horn around but it is not cheap (mini beast II).

http://www.thepropad.com/MiniBeast-A...-Prodlist.html

 

If you just want to change the look, I posted a free or very cheap mod a few years back.
#1247 in the under $50. A thin vertical black line and the cow bell disappears. https://www.hdforums.com/forum/attac...bell-cover.jpg

 

I have the army vet horn cover by that guy, excellent piece.