12 inch MX-TBARS!?!
#3
Don't know if this is what you meant, but it came up on a search:
http://westcoast-tbars.com/index.php...od&productId=6
Here is the information:
Keynote: Risers are 10" tall and the cross bar is welded on top of risers. With an added 2 3/4" rise on the top cross bar
Top Crossbar:
1-1/4" tapered down to 1" diameter steel tubing.
(Fits conventional controls)
Dimpled with 5/8" Holes Drilled for internal wiring.
Cross width is 32" across and pullback is 4".
Your Wrist angle will be at a 18 degree angle Cross bar is welded to sit flat on a 28 degree rake
Hope this helps.
http://westcoast-tbars.com/index.php...od&productId=6
Here is the information:
Keynote: Risers are 10" tall and the cross bar is welded on top of risers. With an added 2 3/4" rise on the top cross bar
Top Crossbar:
1-1/4" tapered down to 1" diameter steel tubing.
(Fits conventional controls)
Dimpled with 5/8" Holes Drilled for internal wiring.
Cross width is 32" across and pullback is 4".
Your Wrist angle will be at a 18 degree angle Cross bar is welded to sit flat on a 28 degree rake
Hope this helps.
#4
Don't know if this is what you meant, but it came up on a search:
http://westcoast-tbars.com/index.php...od&productId=6
Here is the information:
Keynote: Risers are 10" tall and the cross bar is welded on top of risers. With an added 2 3/4" rise on the top cross bar
Top Crossbar:
1-1/4" tapered down to 1" diameter steel tubing.
(Fits conventional controls)
Dimpled with 5/8" Holes Drilled for internal wiring.
Cross width is 32" across and pullback is 4".
Your Wrist angle will be at a 18 degree angle Cross bar is welded to sit flat on a 28 degree rake
Hope this helps.
http://westcoast-tbars.com/index.php...od&productId=6
Here is the information:
Keynote: Risers are 10" tall and the cross bar is welded on top of risers. With an added 2 3/4" rise on the top cross bar
Top Crossbar:
1-1/4" tapered down to 1" diameter steel tubing.
(Fits conventional controls)
Dimpled with 5/8" Holes Drilled for internal wiring.
Cross width is 32" across and pullback is 4".
Your Wrist angle will be at a 18 degree angle Cross bar is welded to sit flat on a 28 degree rake
Hope this helps.
#6
#7
Trending Topics
#9
#10
You could also look at something like crooky's set-up with tall risers and v-rod bars.
https://www.hdforums.com/forum/membe...3262-side.html
https://www.hdforums.com/forum/membe...3262-side.html