Where to get a tool box for my Dyna
#2
If you are referring to the Leather Tool Box my brother has one and when I asked about getting one for my bike he said it was for earlier Dyna's. He has a 2000 Low rider with the Leather Tool Box. It appears that the mounting bracket will not fit our frames. You would have to make a custom bracket to mount it and even then I am not sure it will even fit in the same location.
#3
Join Date: Feb 2007
Location: Harmelen (The Netherlands, Europe)
Posts: 9,002
Received 876 Likes
on
584 Posts
Dyna Leather Toolbox
K,
If you're referring to this one...they sometimes show up at Ebay. Last Summer I saw one sold for 175US$!
If you're referring to this one...they sometimes show up at Ebay. Last Summer I saw one sold for 175US$!
Thanks for your positive feedback drspencer!
I added a new Instruction Sheet to the databse today:
leather tool box (right side tool box), p/n 64245-97
image by SURFOR Chop (thanks for posting it over here, Todd!)
I added a new Instruction Sheet to the databse today:
leather tool box (right side tool box), p/n 64245-97
image by SURFOR Chop (thanks for posting it over here, Todd!)
#4
#7
Trending Topics
#8
Join Date: Feb 2007
Location: Harmelen (The Netherlands, Europe)
Posts: 9,002
Received 876 Likes
on
584 Posts
I have this one on my bike. There's not much room for tools though. He!!, there's no room for anything! Mine is empty.
There is another "box" that fits the lower frame under the voltage regulator. It's a rigid mount mount designed specifically for the bike. I found one at a local dealer. They only had 1 & it was on the shelf for a long time before I finally decided to take it off their hands (thanks to a 20% off all accessories "sale"). It's much nicer than the generic tie-on tool roll bags but it's not very long.
There is another "box" that fits the lower frame under the voltage regulator. It's a rigid mount mount designed specifically for the bike. I found one at a local dealer. They only had 1 & it was on the shelf for a long time before I finally decided to take it off their hands (thanks to a 20% off all accessories "sale"). It's much nicer than the generic tie-on tool roll bags but it's not very long.
#9
There is another "box" that fits the lower frame under the voltage regulator. It's a rigid mount mount designed specifically for the bike. I found one at a local dealer. They only had 1 & it was on the shelf for a long time before I finally decided to take it off their hands (thanks to a 20% off all accessories "sale"). It's much nicer than the generic tie-on tool roll bags but it's not very long.
#10
Tool Box
$20 tool box. http://nybikergear.com/index.php?mai...e817ea3e863302 Holds my tools, Slime air compressor and my tire plugger kit.