Hard bag upgrade ... hopefully
#52
Yeah ...
CV7405B bracket - $248 from M&M
CV7410-CV7411 bags - $600 from Direct Harley Parts
ABS lids - $108 from CaliBikerClub (I think)
hardware for the lids - $164 from fairingfactoryus
latch covers $25 e-bay
locks from New Castle $40
latch trim (to replace reflectors) - $25 e-bay
paint $300
... just a shade over $1,500, all in ... so far, I am not experiencing any 'buyer's remorse' ... LoL
CV7405B bracket - $248 from M&M
CV7410-CV7411 bags - $600 from Direct Harley Parts
ABS lids - $108 from CaliBikerClub (I think)
hardware for the lids - $164 from fairingfactoryus
latch covers $25 e-bay
locks from New Castle $40
latch trim (to replace reflectors) - $25 e-bay
paint $300
... just a shade over $1,500, all in ... so far, I am not experiencing any 'buyer's remorse' ... LoL
#54
and now ?
tour pak?
I got two
a seventies glass one and a new cop bike abs one that looks the same but tough as **** and practical
hit me up I want them gone save me from painting them
bike looks good you have done well
http://www.werule.com/images/fld103/...a/IMG_0444.JPG
Moderator's edit:
Removed bloating image; please do not post images that exceed 800 x 600 pix
tour pak?
I got two
a seventies glass one and a new cop bike abs one that looks the same but tough as **** and practical
hit me up I want them gone save me from painting them
bike looks good you have done well
http://www.werule.com/images/fld103/...a/IMG_0444.JPG
Moderator's edit:
Removed bloating image; please do not post images that exceed 800 x 600 pix
Last edited by FXD2003Rider; 04-07-2013 at 02:55 PM.
#55
Thanks guys ...
Tim ... good seeing you last week at the Long Beach swap meet ... with the rear fender rack I am using, it obstructs the quick detach side plates ... so, I'll have to address that issue before I can proceed with the Tour Pak ... so, probably won't happen for several months ... if ever ...
R/
'Chop
Tim ... good seeing you last week at the Long Beach swap meet ... with the rear fender rack I am using, it obstructs the quick detach side plates ... so, I'll have to address that issue before I can proceed with the Tour Pak ... so, probably won't happen for several months ... if ever ...
R/
'Chop
#57
I'm pretty pleased with the way it has turned out ...
Hope you find this helpful ...
R/
'Chop
#58
70's style
http://www.werule.com/images/fld103/...k/IMG_2574.JPG
Moderator's edit:
Removed bloating image; please do not post images that exceed 800 x 600 pix
http://www.werule.com/images/fld103/...k/IMG_2574.JPG
Moderator's edit:
Removed bloating image; please do not post images that exceed 800 x 600 pix
Last edited by FXD2003Rider; 04-07-2013 at 10:41 AM.
#59
I just got the cross-brace support installed today ...
I had taken a stab at it a couple of weeks ago ... adapting the cross-brace from my old bag frame ... the angle brackets I had fabricated for the setup cracked from the vibration ... so, it was back to the drawing board ...
I had cut off the tabs on the frame designed to support the cross-brace ... they are placed for the short Super Glide fender ... so, they wouldn't work with my setup ...
I made some kind of isoceles triangle-shaped tabs to mount at the bottom of the frame so the cross-brace would be at the lower edge of my fender ...
I think this is going to work well ... it is really solid ...
I had taken a stab at it a couple of weeks ago ... adapting the cross-brace from my old bag frame ... the angle brackets I had fabricated for the setup cracked from the vibration ... so, it was back to the drawing board ...
I had cut off the tabs on the frame designed to support the cross-brace ... they are placed for the short Super Glide fender ... so, they wouldn't work with my setup ...
I made some kind of isoceles triangle-shaped tabs to mount at the bottom of the frame so the cross-brace would be at the lower edge of my fender ...
I think this is going to work well ... it is really solid ...