Help! Im riding along when out of the blue
#12
10-11-2010, 10:40 AM
i questioned the service guy on the everything looked and he said fine and replied that is a logical question. i tell you i really thought it would do some damage, but have had all the aforementioned parts out and all is good.
#13
10-11-2010, 10:47 AM
Join Date: Oct 2010
Location: canada
Posts: 19
Likes: 0
Received 0 Likes
on
0 Posts
the relay is clicking like its supposed to i tried it just now so i will get a new handle bar switch (and maybe a relay ) and install them and see it that works ,,,my nephew has worked on bikes quite a bit and is an auto mech so he can do the cutting off wire and soldering..lol thanks for all the tips
#14
10-11-2010, 10:48 AM
Road Warrior
#15
10-11-2010, 11:08 AM
Road Master
Join Date: Jun 2009
Location: Central NJ
Posts: 796
Likes: 0
Received 0 Likes
on
0 Posts
my starter tries in engage ...what a noise so i pull over and shut her down .when i turn the ignition on the bike starts ...not touching the start button!! im out in the middle of nowhere with my buddys girl on the back soo i figure whatever it is its fuxked so i take her home the noise stopped in a couple minutes ...it still starts but the while its running the starter still tries to engage ...any ideas as to why ??? my bike is a 2000 wide glide with 5500m on it. my shop manual kinda leads to the ignition reg switch .
And an 11 y/o bike w/ only 5500 miles on it? It's obvious that it's failing from lack of use!
Seriously, sounds like the switch. Change that before it costs you a lot more.
#16
10-11-2010, 01:14 PM
Join Date: Oct 2010
Location: canada
Posts: 19
Likes: 0
Received 0 Likes
on
0 Posts
Thread
Thread Starter
Forum
Replies
Last Post
