Dyna Glide Models Super Glide, Super Glide Sport, Super Glide Custom, Dyna Glide Convertible, Super Glide T-Sport, Dyna Glide Police, Dyna Switchback, Low Rider, Street Bob, Fat Bob and Wide Glide.
Sponsored by:
Sponsored by:

ape height

Thread Tools
 
Search this Thread
 
  #11  
Old 10-02-2010 | 05:52 PM
8541hog's Avatar
8541hog
Ultimate HDF Member
Joined: May 2008
Posts: 6,642
Likes: 47
From: Ogden, UT
Default

Originally Posted by bigmikaele
man, this is like deja vu I remember reading the same stuff in a different thread. Think the consensus was that <09 = 10" 09+ = 12" definitely not 8"

But then what do I know... Mine is an 08 and it has 10"

Consensus only counts when accurate. HD says they are 8's Pretty easy to read right on their web site. The ones on yours in your sig pic look like 8's as well. But then you know the old joke about what men tell women is 6".....


As far as 16's and being above your shoulders... If you are a barhopper, no worries, if you are a long hauler, maybe, it is a matter of personal comfort and only you can determine that.
 
  #12  
Old 10-02-2010 | 07:31 PM
ghostrider69's Avatar
ghostrider69
Outstanding HDF Member
Joined: Aug 2009
Posts: 2,729
Likes: 7
From: Republic of Texas
Default

Yeah, 8541hog corrected me on this one. I do know that the one's on my 09 were 12" measured from the bottom where they sit on the risers to the top.
 
  #13  
Old 10-02-2010 | 07:46 PM
toastman's Avatar
toastman
Ultimate HDF Member
Joined: Nov 2009
Posts: 7,081
Likes: 20
From: Queens, NY
Default

i went 14 on two inch risers and wish i'd gone for the 17s carlini offered in the bars i got.

seeing as how your bars won't be on risers, but rather sitting in the integrated risers, you'll get a true amount of rise from the bars only. (a 16 inch bar will put your hands 16 inches above the top tree.)

personally, id go 18 inches and call it a day.

go outside with your wife or girlfriend (or a buddy if you're lucky enough to be single) and have him stretch a measuring tape to each length.

see how each feels.
 
  #14  
Old 10-02-2010 | 10:06 PM
8541hog's Avatar
8541hog
Ultimate HDF Member
Joined: May 2008
Posts: 6,642
Likes: 47
From: Ogden, UT
Default

Well since I was very curious and have some time to kill, here is the REAL story on the Street Bob bars:

09 bars are 10" rise, part number 56951-09 They are 32 wide tip to tip, 6.5 wide at the base, and have 8.75 pullback. So unless you special ordered your bars, they are not 12" on a stock Street Bob.
 
  #15  
Old 10-02-2010 | 10:09 PM
ghostrider69's Avatar
ghostrider69
Outstanding HDF Member
Joined: Aug 2009
Posts: 2,729
Likes: 7
From: Republic of Texas
Default

Well then they must be measured different than the way I measured them. From the bottom of the bars to the top of the bars was 12". Yes I know how to measure bars and yes I can read a tape measure and yes they were the stock bars.
 
  #16  
Old 10-02-2010 | 10:29 PM
8541hog's Avatar
8541hog
Ultimate HDF Member
Joined: May 2008
Posts: 6,642
Likes: 47
From: Ogden, UT
Default

Originally Posted by ghostrider69
Well then they must be measured different than the way I measured them. From the bottom of the bars to the top of the bars was 12". Yes I know how to measure bars and yes I can read a tape measure and yes they were the stock bars.
You measure center to center, or from top of the bottom section to top, you measure actual rise, not total height. HD measures center to center.
 
  #17  
Old 10-02-2010 | 10:49 PM
ghostrider69's Avatar
ghostrider69
Outstanding HDF Member
Joined: Aug 2009
Posts: 2,729
Likes: 7
From: Republic of Texas
Default

Here is an example of how I measured them.

http://jpcycles.custhelp.com/app/ans...o-measure-bars
 
  #18  
Old 10-02-2010 | 11:10 PM
toastman's Avatar
toastman
Ultimate HDF Member
Joined: Nov 2009
Posts: 7,081
Likes: 20
From: Queens, NY
Default

take your lover's quarrel to PM, the guy needs advice to get his scoot lookin better!

 
  #19  
Old 10-02-2010 | 11:43 PM
8541hog's Avatar
8541hog
Ultimate HDF Member
Joined: May 2008
Posts: 6,642
Likes: 47
From: Ogden, UT
Default

Originally Posted by toastman
take your lover's quarrel to PM, the guy needs advice to get his scoot lookin better!

Ever stop to think he might want REAL answers about what he currently has to compare? No one needs your smartass comments.
 
  #20  
Old 10-03-2010 | 12:16 AM
toastman's Avatar
toastman
Ultimate HDF Member
Joined: Nov 2009
Posts: 7,081
Likes: 20
From: Queens, NY
Default

Originally Posted by 8541hog
Ever stop to think he might want REAL answers about what he currently has to compare? No one needs your smartass comments.
i gave him a real answer, a few posts ago.

and he's asking about what to get more than what he has.

also, if you can't take a bit of tongue in cheek humor, i don't quite know what to tell you.
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
marcortez
Dyna Glide Models
15
12-15-2013 06:27 PM
ramu3527
Dyna Glide Models
16
05-22-2012 06:39 PM
Skoorb
Dyna Glide Models
7
12-24-2011 08:13 AM
jkirke
Dyna Glide Models
18
08-09-2011 08:52 AM
Wpittman
Softail Models
4
03-12-2011 08:53 AM



Quick Reply: ape height



All times are GMT -5. The time now is 10:07 AM.