Rear wheel removal 2007 FXDC

Reply Subscribe

Thread Tools

Search this Thread

#11

09-17-2010, 02:52 AM

PKellyMc

Outstanding HDF Member

Join Date: Mar 2008

Location: PacNW; Beacon of Conservatism in a Sea of Liberals.......AZ Snowbird; Just another Conservative

Posts: 2,456

Likes: 0

Received 11 Likes on 7 Posts

+1 on reversing the axle so it doesn't interfere with your pipes.

Reply Like

#12

02-20-2011, 06:29 PM

Herbj

Novice

Join Date: Apr 2010

Location: Newfoundland

Posts: 23

Likes: 0

Received 2 Likes on 1 Post

I reversed by axle, but it looks like the threaded end of the axle would hit my pipes if the suspension extended any further (bike is up on a jack and there is not enough room to stick a finger betweek axle and exhaust support bracket). Will the suspension extend any further than when its on a jack?

Reply Like

#13

02-20-2011, 06:30 PM

Herbj

Novice

Join Date: Apr 2010

Location: Newfoundland

Posts: 23

Likes: 0

Received 2 Likes on 1 Post

here is a picture

Attached Thumbnails

Reply Like

#14

03-26-2011, 08:25 AM

mang0

Road Captain

Join Date: Dec 2009

Location: Syracuse, NY

Posts: 550

Likes: 0

Received 8 Likes on 6 Posts

Quote:

4. After reinstalling the front wheel and putting the front axle back in, you need to align the front axle by putting a 7/16" drill bit in the hole in the right side of the front axle, then lever the right fork leg against the 7/16" drill bit, and then tighten the piece of **** Axle Cap Screws to 10-14 foot pounds. (I used a large screwdriver between the right fork leg and the wheel hub to pull the fork leg against the 7/16" drill bit - it was easy.

Excellent write up, as i am getting ready to replace my rear wheel (and while i'm at it brake pads). I replace front tire last season, but did not find anything in the manaul for alignining front axel...was wondring if i missed something or if this doesnt apply to my 2010 WG?...can you also tell me if there was a need to disconnet brake line or take cover off rear resevoir, or did you simply push pad agianst backing plate ...? Thanks in advance

Reply Like