The wife gave me my fathers day present early. It's the new lift from craftsman. Going to get some boards tomarrow to raise the bike enough to get it on the lift. I saw somewhere in the forum that showed pictures of someone who just rode on to their lift. Would greatly appreciate it if someone could point me back to that website. THANKS!!!

 

Don't understand, you mean the lift (jack) will not fit under your bike?

 

I put the front tire on a 2X4 and tried to slide the lift underneath the frame. I am short by about a 1/2 inch. I read in this forum that lowriders front tire and side stand need to go on a 2X6 to fit the lift under the frame. Somewhere here I found a site that showed someone who built a ramp and could drive right up ont the lift and jack it up while on the bike.

 

Here ya go,

Dexo54 posted this for us so thank him I am just relaying the info on to you.

Good Luck,
Mojo


If you go to muthuh.com he has a really cool way of riding your bike up and onto the jack.

http://muthuh.com is his web

Once there, click on archives then on quick lift

 

That looks easy enough. THANKS!

 

THANK YOU mojo and Dexo54. That is exactly the site I was trying find. Guess its off to home depot for some wood.