Ordered some BCT baffles and was wondering how difficult it is to remove the stock baffles. I prefer to do things myself, within my abilities of course. Any help greatly appreciated!

[IMG]local://upfiles/3645/81E8914FC5054425826CE9BF862F51A4.jpg[/IMG]

 

Do they phit in the V&H pipes?

Should be difficult to remove the V&H baffles. I believe they come out by removing a hex bolt on the under or back side of the pipe. Might need to take the heat shields off.

 

Not a problem.....just take the end caps off. They are held on by an allen screw. You don't have to take the heat shields off.

You may need to spray a little WD40 if they seem stuck. Mine came out easy.

I went back with V&H "Quiet Baffles"