new bars and risers
#1
new bars and risers
ya i know, it is late in the winter (spring) to be working on my bike now, but we had a busy winter!!! so now i get to work on some of our stuff... doing the motor, and just got my new risers in from Loner. I love that he does our shops machine work, by far is the best CNC i have ever had the honor of working with...
alot more mods to come in the next few weeks!
told him what i wanted and he ran with it, made me the coolest risers i have ever seen!
bear in mind that these willl be quick release. i am going to pre wire them so i can swap from the apes to these by just unpluging the wires, pulling the controls and bolting on the new bars, a 5 min job! be awesome
but here are my new bars... stil need custom coating and some polishing but you get the idea!
the rise is 12.5, plus the 1.5 on the bar, bringin me right around 14 inches, they are cored for internal wiring down the risers, have a support plate that goes across the top of the bar to keep them from moving and twisting, and have custom dice CNC caps for the risers... just awesome! Picked up the bars last night and did a quick mock up
everything will be gloss black, (controls, bars, risers, and the dots on the dice, the caps will be polished to a high gloss, and textrued powder will be used on the grips.
alot more mods to come in the next few weeks!
told him what i wanted and he ran with it, made me the coolest risers i have ever seen!
bear in mind that these willl be quick release. i am going to pre wire them so i can swap from the apes to these by just unpluging the wires, pulling the controls and bolting on the new bars, a 5 min job! be awesome
but here are my new bars... stil need custom coating and some polishing but you get the idea!
the rise is 12.5, plus the 1.5 on the bar, bringin me right around 14 inches, they are cored for internal wiring down the risers, have a support plate that goes across the top of the bar to keep them from moving and twisting, and have custom dice CNC caps for the risers... just awesome! Picked up the bars last night and did a quick mock up
everything will be gloss black, (controls, bars, risers, and the dots on the dice, the caps will be polished to a high gloss, and textrued powder will be used on the grips.
#7
Trending Topics
#9
i wanted something a bit more in my face and solid than the apes for after the motor is done, so I can really push the bike when i am trying to keep up with chad and his brother, hell and my brother! so this will give me better control when i am ripping hard. the bars are actaully stock V rod bars, i will have to check on the width when i get home. i really like the T bar style but had to do something a bit diff than SOA, having someone like Loner in my corner really helps!