forward controls to far forward
#1
#3
here is the link.
https://www.hdforums.com/forum/dyna-...-forwards.html
You can also use the peg elevators from custom cycle
http://www.axiomcycles.com/pages/ite...temsection=159
Or if you are in the UK try these
http://cgi.ebay.co.uk/ws/eBayISAPI.d...i%3D1&viewitem=
https://www.hdforums.com/forum/dyna-...-forwards.html
You can also use the peg elevators from custom cycle
http://www.axiomcycles.com/pages/ite...temsection=159
Or if you are in the UK try these
http://cgi.ebay.co.uk/ws/eBayISAPI.d...i%3D1&viewitem=
#4
Join Date: Jan 2007
Location: along the shore of Mishigami
Posts: 15,718
Received 4,763 Likes
on
2,531 Posts
#7
Trending Topics
#8
You can try these
http://cgi.ebay.com/ebaymotors/KURYA...item519161682b
They come in 2" and 4".
I have some that are similar that are 3" and really like them. http://cgi.ebay.com/ebaymotors/ws/eB...m=290406867792
I'm 6' with a 30" inseam and these have made riding very comfortable for me again.
http://cgi.ebay.com/ebaymotors/KURYA...item519161682b
They come in 2" and 4".
I have some that are similar that are 3" and really like them. http://cgi.ebay.com/ebaymotors/ws/eB...m=290406867792
I'm 6' with a 30" inseam and these have made riding very comfortable for me again.
#9
Well what you might have to do is make up some plates to go on the forward frame tabs and put a second set of holes back aprox 1 inch then mount the forwards to that. Then shorten
brake rod and adjuster side Brake rod is a pain!! I tried this first but could not get comfortable on longer rides I went back and forth for almost 4 years between this and Mids
What I have done now is floor boards with custom brackets and I cannibalized my forwards to make them work. I will try and post some pics today to give you what worked for me
Oh Be careful with forward frame tabs so as you do not cross thread them or you will have to chase them with a Tap
Ok I have some pics attached This is a work in progress Hope These Help
Carl
brake rod and adjuster side Brake rod is a pain!! I tried this first but could not get comfortable on longer rides I went back and forth for almost 4 years between this and Mids
What I have done now is floor boards with custom brackets and I cannibalized my forwards to make them work. I will try and post some pics today to give you what worked for me
Oh Be careful with forward frame tabs so as you do not cross thread them or you will have to chase them with a Tap
Ok I have some pics attached This is a work in progress Hope These Help
Carl
Last edited by rowan; 03-24-2010 at 10:36 AM. Reason: pictures added
#10