Installing them now along with new neck bearings, wish me luck Im almost done.

 

You Can DO IT!!!!

 

good luck

 

got it all together and seems great for the limited test I took, tomorrow I need to set the fall away and take a real ride.

 

Good for you man, wasn't all that bad too do was it? Those intiminators are pretty well plug and play or drop and lock, hehe.

 

How does one 'Set the fallaway'?

Steve

 

Get a manual, (really) I aint that bright, if I hadn't had one I would not have gotten to the point I did, I got hung up in the middle and had a friend help me. He helped me with the Front end Fork neck bearings as well- The Ricor and Superbrace were easy though.
I'm impressed, rode 30 miles into work tonight and its absolutely an improvement, corners a lot better and smooths out the bumps.
I used ALL ***** neck bearings, I don't know what HD was thinking, they told me the neck bearings were 61 bucks, Parts Bros in Lewisville charged me 25 bucks for the upper and lower-don't know if HD just quoted me the wrong price or what.

 

The Ricor Superbrace additions to the front end are impressive-I'm easy doing what were 50 mph corners at about 80, but the old stock rear shocks wont keep up, I know I could do better with some better shocks, next upgrade I guess

 

I had the same experience. I have Ohlins shocks coming...

Steve

 

I ordered some shocks from motorcyclemetal.com and they sucked. Rode like an old Mac truck so I sent them back at my cost. He said he fixed them then billed me for shipping back to me. I felt like was kicked in the gut by an ***. I guess I was in a way.

He said he made them very soft but I didn't ask for that. So I guess I'll have a pair of $600 paper weights when they get here.

Beware of doing business with that outfit. They cheat and don't stand behind their product.