I got these in my garage that I'll be putting on when I decide to go out in the cold. I don't have pics, but there are a few people that have them here. I'll be putting them on my lower trees though. I don't like the extra brackets on the tubes, which is why I went with these.

http://www.phatperformanceparts.com/...47&click=37735

 

Not a totally bad idea but instead I tossed my tail light and my rear signals are now my tail / brake light. But if I can manage to eliminate or shrink my front signals I'd definately go for that.PS I feel the same way about license plate lights and I've never been stopped or cited about those either.I think I'll leave my signals on the handle bars until everyone else moves thiers then mine will look unique, it does clean up the look of the forks after all.

 

Anybody every used the Harley kit to relocate the signals to just below the upper tree instead of just above the lower tree? 08fxdf43202 had done it here https://www.hdforums.com/forum/dyna-...fat-bob-2.html but his is not the HD kit.

 

These are what I used...

http://cgi.ebay.com/ebaymotors/41mm-...Q5fAccessories

 

Jaron, have you put these on yet? The product says for 06-07 Dynas so just wondering if it worked on your 08 SB.

Has anyone tried this on a 10 WG yet?

 

I just used two of the right side handle bar mounts and bolted them to the lower tree pinch bolts. Its in the under $50 thread. Tucks the signals nice and close to the forks

 

Thanks Yasky...I saw your post on the under $50 thread...but the pics didn't load for some reason. They did on this post and it looks great. May give that a shot.

 

Not yet. I've been slacking and haven't felt like hanging out in the cold. I know they will work because tweakin has the same ones and I think hickey has them as well. I'm also waiting for my bars so I can knock out the whole front end at once. Tweakin grinded his down to fit closer to the forks. I held mine up and looks like there is just under a 1/8 inch gap, which doesn't bother me.

 

OOOPS!! Accidentally unsubscribed!!

 

These show they are only for 06-07 dynas.............any reason they wouldn't work on an 08? (they all have the 49mm tubes)

EDIT: whoops - I shoulds kept reading - question already answered.