When it rains... it pours... a little help pls
#11
http://www.cyclevisions.com/lighting...e-plate-frame/
this is a nice idea if you have your plate on the fender.
this is a nice idea if you have your plate on the fender.
#12
#13
you can find braided line at a performance part store or summit,jegs online i think you have to have some sorta positive connection because of the fuel injection on your bike i dont think just hose clamping a fuel line will work very long with positive results .
#14
Did you break the fuel line going into the back of the breather or the crossover at the front of the tank?
If you broke the line that feeds the breather then where did it break? I made the same mistake a year or so ago.
Check out my thread about this: https://www.hdforums.com/forum/dyna-...-few-days.html
The part number should be a rev of 62349-04F I'm currently running an A rev with out issue so you should be able to run a -04A all the way through to -04F.
If you want to make your own braided cable as harley doesn't make one that "officially" works with the new Dynas so look at getting the Dorman connectors and then some braided fuel line and crimping your own. Just make sure you use the quick disconnect from the OEM part, so long as it isn't broken...
As far as everything else goes, good luck, live and learn, welcome to the club
If you broke the line that feeds the breather then where did it break? I made the same mistake a year or so ago.
Check out my thread about this: https://www.hdforums.com/forum/dyna-...-few-days.html
The part number should be a rev of 62349-04F I'm currently running an A rev with out issue so you should be able to run a -04A all the way through to -04F.
If you want to make your own braided cable as harley doesn't make one that "officially" works with the new Dynas so look at getting the Dorman connectors and then some braided fuel line and crimping your own. Just make sure you use the quick disconnect from the OEM part, so long as it isn't broken...
As far as everything else goes, good luck, live and learn, welcome to the club
#15
Dude! thats one of the finest looking bikes I have seen on this site. Lets hear all about it!
#16
Thread
Thread Starter
Forum
Replies
Last Post