what cams?
#11
![Default](https://www.hdforums.com/forum/images/icons/icon1.gif)
this may or not help..
http://www.americanrider.com/output.cfm?id=1205749
http://www.americanrider.com/output.cfm?id=1205749
Actually the andrews 21 either chain or gear look interesting.
"more torque for all around riding with heavy bikes, intended for stock compression ratio and pistons. Similar to #23 cam in EV80. (1700-4800 RPM).
That rpm range appeals to me more than the 37 (2200-5600 RPM) Bob may not be considered a "heavy" bike but I want more low end torque for when I pack up the ole lady and fill the bags and tie down most every possession (it seems). It really does fine on the hwy on road trips but packing two up and wanting to ***** n git off the line is a little week, the pully should help there too.
why no headwork? if you are going to do it do it right bud, it is an extra 600 for good head work done. Hell Chad has had my Cams for almost 3 months now, i am waiting till i can pop the extra $ for the heads to get the full benifit out of the cams... i am a big fan of do it right, do it once!
I was running the SE204 cams in my 1550 WG, and the performance was excellent. Nice thing about the 204's is almost a 'drop in' application that works very well with stock heads, compression and valve springs. From what I recall peak horsepower was in the 5,700 RPM range. I believe the spec's for the SE204's are 508/508 on the lift, and 236/240 duration.
![](http://dogsdoom.com/PI/2003-wd-rightside-post.jpg)
![](http://dogsdoom.com/PI/2003-wd-rightside-post.jpg)
I'm reading and doing homework to pick my cams, you guys are helpful to say the least, I'm not real cam savy but I try to pay attention.
![Smile](https://www.hdforums.com/forum/images/smilies/smile.gif)
Thanks for the replies
Last edited by arnold; 11-18-2009 at 07:39 PM.
#13
![Default](https://www.hdforums.com/forum/images/icons/icon1.gif)
You might want to consider the SE 255's. Several us on the forums have installed these cams. They provide a nice flat torque increase from under 2000 and peak about 3200 RPM. So the gained power increase is in a very usable range. I gained a solid 10 ft/lbs and 10 hp when I put them in (already had A/C, pipes and SERT). I also got a tune. You probably won't realize all the increase if you just get a canned download. iclick did his and used his FuelMoto with autotune I think... he didn't have it dyno'ed but said he feels the increase.
Do a search on SE 255 for lot's more info and how to install yourself. These cams are standard on the 103 KIT and SEs. Some people opt to change to a more aggressive cam since they do some head work to increase compression, so you can sometimes pick up a used set on ebay or at your Harley dealer. I got mine from my HD owner who upgraded his 110 KIT cams (only 2300 miles on them).
Do a search on SE 255 for lot's more info and how to install yourself. These cams are standard on the 103 KIT and SEs. Some people opt to change to a more aggressive cam since they do some head work to increase compression, so you can sometimes pick up a used set on ebay or at your Harley dealer. I got mine from my HD owner who upgraded his 110 KIT cams (only 2300 miles on them).
#14
![Default](https://www.hdforums.com/forum/images/icons/icon1.gif)
You might want to consider the SE 255's. Several us on the forums have installed these cams. They provide a nice flat torque increase from under 2000 and peak about 3200 RPM. So the gained power increase is in a very usable range. I gained a solid 10 ft/lbs and 10 hp when I put them in (already had A/C, pipes and SERT). I also got a tune. You probably won't realize all the increase if you just get a canned download. iclick did his and used his FuelMoto with autotune I think... he didn't have it dyno'ed but said he feels the increase.
Do a search on SE 255 for lot's more info and how to install yourself. These cams are standard on the 103 KIT and SEs. Some people opt to change to a more aggressive cam since they do some head work to increase compression, so you can sometimes pick up a used set on ebay or at your Harley dealer. I got mine from my HD owner who upgraded his 110 KIT cams (only 2300 miles on them).
Do a search on SE 255 for lot's more info and how to install yourself. These cams are standard on the 103 KIT and SEs. Some people opt to change to a more aggressive cam since they do some head work to increase compression, so you can sometimes pick up a used set on ebay or at your Harley dealer. I got mine from my HD owner who upgraded his 110 KIT cams (only 2300 miles on them).
#15
#16
#18
![Default](https://www.hdforums.com/forum/images/icons/icon1.gif)
Thanks
#19