Last edit by: IB Advertising
Thug Style / Club Style Dyna pic's
http://www.hdforums.com/forum/dyna-g...yna-pic-s.html
ISSUE
Member Lama is in the process of modding his 2007 FXDC into a club style or thug style bike (known today as outlaw bikes) Asks members to provide inspiration and post pictures of their own bikes. Members show off their bikes.
Read below for the full discussion…
http://www.hdforums.com/forum/dyna-g...yna-pic-s.html
ISSUE
Member Lama is in the process of modding his 2007 FXDC into a club style or thug style bike (known today as outlaw bikes) Asks members to provide inspiration and post pictures of their own bikes. Members show off their bikes.
Read below for the full discussion…
Thug Style / Club Style Dyna pic's
#9391
I like the sig... Only modded the black parts.... Ha!
Two questions... Did you have the powder done locally, and where does that black braided breather hose run to? Well, I guess three questions.... Catch can at the end of the breather hose?
Inspirational machine you've built. Thinking I'll go the same route with the powdered black six spokes.
Last edited by Maxxsmart; 03-05-2016 at 12:35 PM.
#9392
Haha! It was all black before, its just gloss now instead of wrinkle. Just wanted to put some contrast in there
#9393
Looks great though. I like the contrast in the blacks... which, thinking about it, sounds like that can't really be a thing... black contrasting black...
#9394
I like the sig... Only modded the black parts.... Ha!
Two questions... Did you have the powder done locally, and where does that black braided breather hose run to? Well, I guess three questions.... Catch can at the end of the breather hose?
Inspirational machine you've built. Thinking I'll go the same route with the powdered black six spokes.
Two questions... Did you have the powder done locally, and where does that black braided breather hose run to? Well, I guess three questions.... Catch can at the end of the breather hose?
Inspirational machine you've built. Thinking I'll go the same route with the powdered black six spokes.
The breather hose just goes to the bottom of the bike and drips on the ground, you can see the end of it in this picture
#9395
Does seem weird black contrasting black lol. Thanks though! I really like the way it turned out. Hows that ripper of yours runnin'?
#9396
It's running good and is so rad!!! Still need to stack on about 500 miles before final tune. Got a new pipe in the mail to arrive Monday (Bassani RR3 SS). Got some more parts for 2" over front, so that's waiting for me, as well. Got **** to do today so I don't know if I'll get out on it today and looks like your rain is coming to wet us tomorrow. And I'm waiting on some spacers from Works for my shock mountings... might shim with washers temp if I get a chance to run to the HW store...
#9398
It's running good and is so rad!!! Still need to stack on about 500 miles before final tune. Got a new pipe in the mail to arrive Monday (Bassani RR3 SS). Got some more parts for 2" over front, so that's waiting for me, as well. Got **** to do today so I don't know if I'll get out on it today and looks like your rain is coming to wet us tomorrow. And I'm waiting on some spacers from Works for my shock mountings... might shim with washers temp if I get a chance to run to the HW store...
#9399
Troy the GM is awesome, he gave me a tour of the whole shop and explained the entire process to me. You might even be able to ship your parts in to them if that would make it easier for you
#9400
I like contrasting blacks, nice job.
Really like the smoke chrome look on the new Break-Out CVO. Wonder how that would hold-up with motor heat. Is it some type power coat on the CVO?
Does any one know what kind of finish is on this silver bike? Looks like it would have to be paint with a flat sheen clear coat. I would like to try copying the finish on my gas tank & fenders.
Really like the smoke chrome look on the new Break-Out CVO. Wonder how that would hold-up with motor heat. Is it some type power coat on the CVO?
Does any one know what kind of finish is on this silver bike? Looks like it would have to be paint with a flat sheen clear coat. I would like to try copying the finish on my gas tank & fenders.