Last edit by: IB Advertising
Thug Style / Club Style Dyna pic's
http://www.hdforums.com/forum/dyna-g...yna-pic-s.html
ISSUE
Member Lama is in the process of modding his 2007 FXDC into a club style or thug style bike (known today as outlaw bikes) Asks members to provide inspiration and post pictures of their own bikes. Members show off their bikes.
Read below for the full discussion…
http://www.hdforums.com/forum/dyna-g...yna-pic-s.html
ISSUE
Member Lama is in the process of modding his 2007 FXDC into a club style or thug style bike (known today as outlaw bikes) Asks members to provide inspiration and post pictures of their own bikes. Members show off their bikes.
Read below for the full discussion…
Thug Style / Club Style Dyna pic's
#8392
Thug Style / Club Style Dyna pic's
Originally Posted by wideopen4life
Misfit, what blocks are you using under your bike for the jack??
#8393
#8394
Yea bro! I've been lurking too long. Yea, the ness rotor that I have will only fit wheels w/ hub mounted rotors. As for the pads hitting each other when they wear down, it looks like it'll be metal to metal by the time they touch.
#8395
[QUOTE=speedkills66;14332602]Thanks for the compliment.
The seat is a stock HD seat from a Super Glide (from several years 08-13 I think) and the sissy bar is from a Wide Glide (same period).
You could install the sissy bar before the bags or at the same time. You just have to use the correct spacers for the bag mounts.
For the tail light relocation I used a kit from Great Bike Gear. A little pricey but way better than the plastic version HD sells.
You can probably find info on the relocation options earlier in this thread.
By the way just yesterday I added the Ness 15" Big Brake rotor....
Looks so much better on the switchblades IMO
The seat is a stock HD seat from a Super Glide (from several years 08-13 I think) and the sissy bar is from a Wide Glide (same period).
You could install the sissy bar before the bags or at the same time. You just have to use the correct spacers for the bag mounts.
For the tail light relocation I used a kit from Great Bike Gear. A little pricey but way better than the plastic version HD sells.
You can probably find info on the relocation options earlier in this thread.
By the way just yesterday I added the Ness 15" Big Brake rotor....
Looks so much better on the switchblades IMO
#8396
Thank bro! Been a fan of your scoot for a while now. As far as the night dragons, so far so good, sticky once they're warmed up, been keeping an eye on my PSI everyday. Currently I'm running 31lbs up front and 36lbs in the rear.
#8398
Thanks for info...keep us posted