Last edit by: IB Advertising
Thug Style / Club Style Dyna pic's
http://www.hdforums.com/forum/dyna-g...yna-pic-s.html
ISSUE
Member Lama is in the process of modding his 2007 FXDC into a club style or thug style bike (known today as outlaw bikes) Asks members to provide inspiration and post pictures of their own bikes. Members show off their bikes.
Read below for the full discussion…
http://www.hdforums.com/forum/dyna-g...yna-pic-s.html
ISSUE
Member Lama is in the process of modding his 2007 FXDC into a club style or thug style bike (known today as outlaw bikes) Asks members to provide inspiration and post pictures of their own bikes. Members show off their bikes.
Read below for the full discussion…
Thug Style / Club Style Dyna pic's
#7451
Great Mod Monster...condolences on loss of your friend...yes whiskey...
#7452
Monster, sorry to hear about your friend. I know what you're going through.
My dad has his dogs name tag, Bella on his bike, right next to the guardian bell I bought him, and her favorite bandana on the bike.
#7453
#7454
Join Date: Nov 2012
Location: The Whale's Vagina
Posts: 2,291
Likes: 0
Received 11 Likes
on
11 Posts
had nasty buffeting with my hd 1/4 fairing. sold it, bought a rifle...same thing! im 5'7" wear a fullface shoei. i can see/feel the wind coming from my lap up my body and right into my chin, bouncing my helmet around.
anyone else get this? any solution? i like the look and the pressure off my chest, but it sounds like a helicopter in my helmet so thats not gonna work
anyone else get this? any solution? i like the look and the pressure off my chest, but it sounds like a helicopter in my helmet so thats not gonna work
#7455
Join Date: Nov 2012
Location: The Whale's Vagina
Posts: 2,291
Likes: 0
Received 11 Likes
on
11 Posts
HD Pilot did a nice write up on the 30T install.
#7456
Few others responded so thank you, i only know how to quote one guy at a time haha.
Helmet is a shoei RF1100, so its not cheap. It has no chin curtain though so ill try to find one.
Thanks JPACE, the shield is 17" I believe but Id have to measure it again. Got it used. Its really tall though, so maybe that is my problem. 9.5" pullback risers with biltwell tracker bars so about 12" total. I didnt notice any difference with the bagger baffle with my HD fairing either.
Does anyone know if you can cut the shield down (and how?) instead of ordering another and waiting?
Helmet is a shoei RF1100, so its not cheap. It has no chin curtain though so ill try to find one.
Thanks JPACE, the shield is 17" I believe but Id have to measure it again. Got it used. Its really tall though, so maybe that is my problem. 9.5" pullback risers with biltwell tracker bars so about 12" total. I didnt notice any difference with the bagger baffle with my HD fairing either.
Does anyone know if you can cut the shield down (and how?) instead of ordering another and waiting?
What size shield are you running? I had the exact same issues when I was running the 18" shield. Changed to 15" shield and different bars (12" slingshots from 18" apes) which allowed me to angle the whole thing back more and buffeting is gone. I wear a Simpson Bandit or a Bell RS1, no buffeting with either now. Try angling it back as far as you can and see if that makes a difference. I'm 6'1", so you might consider shortening the shield below 15". In my opinion you actually want the air/wind directed at your helmet to avoid buffeting if that makes sense. The oncoming air will keep the air from coming up your body and wanting to lift your helmet. The main job of these smaller fairings is to keep the pressure off of your chest. I also tried the lower wind deflector from the bagger prior to switching bars and shield and I didn't notice much of a difference, if any.
#7459
Done for now on this customers bike. Sway-A-Ways are still on back order, as is the Sputhe. Started as a pretty rough 03 Anniversary FXD. Owner liked the white Sporty I had just finished and wanted this in the same vein. Speed Merchant and Race Tech parts up front, floating rotors f&r, Mustang fastback, Gauntlet fairing, 10" Biltwell risers with Zed bars and grips, Big Sucker, T-Header. Next round is all motor so that'll be fun. I just picked up a cream puff two owner 9500mi 87 FXR-SP for myself that'll be getting the treatment as well. I'll post a lil something once it gets going.
#7460
Done for now on this customers bike. Sway-A-Ways are still on back order, as is the Sputhe. Started as a pretty rough 03 Anniversary FXD. Owner liked the white Sporty I had just finished and wanted this in the same vein. Speed Merchant and Race Tech parts up front, floating rotors f&r, Mustang fastback, Gauntlet fairing, 10" Biltwell risers with Zed bars and grips, Big Sucker, T-Header. Next round is all motor so that'll be fun. I just picked up a cream puff two owner 9500mi 87 FXR-SP for myself that'll be getting the treatment as well. I'll post a lil something once it gets going.