Last edit by: IB Advertising
Thug Style / Club Style Dyna pic's
http://www.hdforums.com/forum/dyna-g...yna-pic-s.html
ISSUE
Member Lama is in the process of modding his 2007 FXDC into a club style or thug style bike (known today as outlaw bikes) Asks members to provide inspiration and post pictures of their own bikes. Members show off their bikes.
Read below for the full discussion…
http://www.hdforums.com/forum/dyna-g...yna-pic-s.html
ISSUE
Member Lama is in the process of modding his 2007 FXDC into a club style or thug style bike (known today as outlaw bikes) Asks members to provide inspiration and post pictures of their own bikes. Members show off their bikes.
Read below for the full discussion…
Thug Style / Club Style Dyna pic's
#7301
Join Date: Aug 2014
Location: 42.5833° N, 114.4667° W
Posts: 597
Likes: 0
Received 7 Likes
on
3 Posts
Here she is, all shined up.
2.5" Tank lift, WG Sissy Bar, Arlen Ness LED Bolt-On rear signals, DK Coil and plate relocation kits all added since my last pics.
My buddy's a machinist and made me a new bracket for the headlight/ fairing. I lowered the triples .5" so the fairing would mount up 2.5" higher than OEM.
That, combined with the 13" progressives, shortened the trail just enough for the bike to handle just the way I like it.
SWEET!
Prob gonna do forwards when I get the guts to tear into that far. Also fanatically waiting for Joker front LED signals.
The HD engine bright stuff is nice.
2.5" Tank lift, WG Sissy Bar, Arlen Ness LED Bolt-On rear signals, DK Coil and plate relocation kits all added since my last pics.
My buddy's a machinist and made me a new bracket for the headlight/ fairing. I lowered the triples .5" so the fairing would mount up 2.5" higher than OEM.
That, combined with the 13" progressives, shortened the trail just enough for the bike to handle just the way I like it.
SWEET!
Prob gonna do forwards when I get the guts to tear into that far. Also fanatically waiting for Joker front LED signals.
The HD engine bright stuff is nice.
#7302
not really when you factor in thunder header sells there damn pipes for 500-600 then they sell you there shields for another 250 for 100-150 more might as well go with sawicki or spf that sell there hand built systems for 1,000
#7303
http://www.thrashinsupply.com/produc...ess-steel-pipe
#7304
Thrashin makes a similar pipe but slightly less $$$
http://www.thrashinsupply.com/produc...ess-steel-pipe
http://www.thrashinsupply.com/produc...ess-steel-pipe
http://www.twobros.com/products/dyna...Dyna-2014.html
Not a fan of the carbon fiber cone but I heard one for the first time last week and I was sold. Sounds so solid. I'm actually jumping on it this week and figure I'll coat that carbon fiber cone. Pretty pumped about it. That being said...it was hard as hell for me to choose between Sawicki, spf, and TBR. They're all badass.
Last edited by BobberG; 04-20-2015 at 08:57 AM.
#7305
Just finished putting an open belt drive on it. It has 16 inch apes.with 5inch risers. 2 1/2 inch riser on the tank. Progressive suspsion not sure of the size. Chopped rear fender wide tire kit. It has a 160 on it now going to a 180. 41mm inverted front end raked 3 degree. 21 inch reckoning rim up front 18 rear. Kuryakyn forward controls yada yada
Last edited by 97 dyna lowrider; 04-20-2015 at 03:32 PM.
#7308
Just finished putting an open belt drive on it. It has 16 inch apes.with 5inch risers. 2 1/2 inch riser on the tank. Progressive suspsion not sure of the size. Chopped rear fender wide tire kit. It has a 160 on it now going to a 180. 41mm inverted front end raked 3 degree. 21 inch reckoning rim up front 18 rear. Kuryakyn forward controls yada yada