Dyna Glide ModelsSuper Glide, Super Glide Sport, Super Glide Custom, Dyna Glide Convertible, Super Glide T-Sport, Dyna Glide Police, Dyna Switchback, Low Rider, Street Bob, Fat Bob and Wide Glide.
Member Lama is in the process of modding his 2007 FXDC into a club style or thug style bike (known today as outlaw bikes) Asks members to provide inspiration and post pictures of their own bikes. Members show off their bikes.
So finally got the leatherpros on and worked out. Had to relocate the signals to the rear of the bike.. after much thought on how I should do it, I decided on this. It cost me $0 and took 10 minutes with a dremel. It came out clean and visible
The leatherpros are fantastic. I wish I had pulled the trigger earlier on these. I know the flow of the rear fender isn't as nice with the bags as say a superglide fender, but it doesn't look too bad...
Looks great, izzy. I forgot, did you powder or ceramic coat your pipe? Looks like it's holding up really well. The second set of sheilds Bassani sent me are starting to flake again, and I'm ready to take them in to a good coating place near me. I want them to do the muffler to match, but concerned about how the heat will affect it.
Finally got all my **** installed, like night and day vs stock. Sputhe front and rear, dual bagger Brembos and braided lines, 13.5" Works black trackers, Works dual rate drop in cartridge with Speed Merchant preload adjusters, and black wheel spacers and dust caps to top it off. Have to reapply vinyl to fork tubes between triple trees. Cams, wheels, Lyndall rotors and pads are next
What lower legs did you use? Any custom machining for caliper spacing?
What lower legs did you use? Any custom machining for caliper spacing?
Caliper spacing was perfect as is. The pads do overlap though, so I pulled them out and did a quick mod on them to compensate until I figure something else out. I just used the black lower dual caliper legs that are available through HD. I can get you a PN when I get back home this afternoon. Very noticeable difference from stock setup though, really happy I did it
Caliper spacing was perfect as is. The pads do overlap though, so I pulled them out and did a quick mod on them to compensate until I figure something else out. I just used the black lower dual caliper legs that are available through HD. I can get you a PN when I get back home this afternoon. Very noticeable difference from stock setup though, really happy I did it
Cool, I got a set of black dual disk Fat Bob lowers for my 2013 Street Bob. Just wanted to know if you used Fat Bob or Low Rider dual disk lowers.
02-18-2015, 10:49 AM
