02-18-2015, 11:49 AM
Last edit by: IB Advertising
Thug Style / Club Style Dyna pic's
http://www.hdforums.com/forum/dyna-g...yna-pic-s.html
ISSUE
Member Lama is in the process of modding his 2007 FXDC into a club style or thug style bike (known today as outlaw bikes) Asks members to provide inspiration and post pictures of their own bikes. Members show off their bikes.
Read below for the full discussion…
http://www.hdforums.com/forum/dyna-g...yna-pic-s.html
ISSUE
Member Lama is in the process of modding his 2007 FXDC into a club style or thug style bike (known today as outlaw bikes) Asks members to provide inspiration and post pictures of their own bikes. Members show off their bikes.
Read below for the full discussion…
Thug Style / Club Style Dyna pic's
#5971
10-01-2014 | 11:23 PM
Seasoned HDF Member
Joined: Dec 2010
Posts: 6,642
Likes: 1,078
From: Florida
Well I took the plunge today. Dropped my dyna off at my buddies shop to take the motor out and then take the motor to the motor guy for go fast parts. I am very exited and stressed all at the same time. I talked myself I to having the flywheels welded, trued, and a timken conversion done while it's torn down for the big bore and cams. Can't wait to get it back for break in and pv tuning
Last edited by misfitJason; 10-02-2014 at 09:56 AM.
#5972
10-02-2014 | 07:06 AM
Road Master
Joined: Aug 2013
Posts: 837
Likes: 7
From: Wyoming
Well I took the plunge today. Dropped my dyna off at my buddies shop to take the motor out and then take the motor to the motor guy for go fast parts. I am very exited and stressed all at the same time. I talked myself I to having the flywheels welded, tried and a timken conversion done while it's torn down for the big bore and and. Can't wait to get it back for break in and pv tuning
#5973
10-02-2014 | 03:18 PM
Road Captain
Joined: Jan 2013
Posts: 553
Likes: 1
From: South MS
#5974
10-02-2014 | 07:45 PM
Extreme HDF Member
Joined: May 2010
Posts: 11,165
Likes: 1,792
From: Puget Sound, WA.
#5977
10-02-2014 | 10:18 PM
Seasoned HDF Member
Joined: Dec 2010
Posts: 6,642
Likes: 1,078
From: Florida
Mild build. 95 inch 9.4-1 compression with 203 cams. Flywheels trued and welded with timken bearings. Cam bearings swapped out. Baisley oil pump spring, s&s lifters and adjustable pushrods. No headwork right now. In the near future when I do I will probably change the cams up to suite.
#5979
10-03-2014 | 12:10 AM
Road Warrior
Joined: May 2010
Posts: 1,718
Likes: 15
From: Bay area, CA
Nice! Are you keeping the heads and jugs silver? I was tossing around going with black jugs, silver heads and black rocker boxes. Started thinking that would be too choppy with the colors so I may end up keeping the heads and jugs silver and just doing the rocker boxes. HdBobber I think you had silver cases and black jugs and heads right? You got any pics? I think your running chrome rockers tho.... Black jugs heads and rockers may be too much black.. I dunno... Sorry for rambling
#5980
10-03-2014 | 10:15 AM
Ultimate HDF Member
Joined: Apr 2014
Posts: 6,322
Likes: 2,500
From: Tennessee
Those old FXRP's are nice bikes...I used to have a bunch of "take off" FXRP fairings around and that's where the one on the bike in the photo came from. I'm workin' on setting my Dyna up that way now.