Hard to say without seeing what light you have. The harley fairing is designed to work with the 5 & 3/4" light. It has a gasket that seals up against the headlight, but thats not to say that it wont work with your setup. Worst case I guess, would be to put a factory light back on the bike. Post up a pic of your bike if you get a chance.

 

I havent been here for a while, but Busters bike looks great!

Roy that color on your bike looks sharp also. Its a nice change from the norm. Soon I will have pictures of my bike to contribute to this thread.

 

gorgeous bike!!!

 

The Bung King brackets come with a headlight spacer. Here's a link to a write up I did on mine:

https://www.hdforums.com/forum/dyna-...g-project.html

 

I thought at one time I saw a write up on using the harley quick clamps for 39mm on a harley 1/4 fairing, if anyone knows of this can you point me in the right direction.
Thanks, I have searched and can't find it now.

 

Can someone answer a quick question of mine.

want to run Death Squad risers on my FXR, will they fit with Protaper EVO bars?

 

Should be easy to figure out. Real easy....pro taper evo are 1 1/8 Diam. I would guess ds risers are 1 in diam, with out looking it up. So I would say no it won't work. Could get forbidden risers which are made to fit 1 1/8 bars.

 

I think Ric at southeast custom Cycles also has Risers for Pro Taper 1 1/8 bars as well.

 

Well *****, thanks for the reply. I just don't want to eliminate the stock mount bracket with the neutral/oil/signals.

Maybe recommend a bar with almost zero pullback/rise? That isn't a tbar. Eff maybe I will run tbars who knows.

 

DS risers with biltwell zero drag bars should work. Or Talk to Jim @ Forbiden or ric @ south each customs both them sell Forbiden pro taper risers one of them might have something to remount your gauge/light cluster if you wana use pro tapers....

Good luck