Last edit by: IB Advertising
Thug Style / Club Style Dyna pic's
http://www.hdforums.com/forum/dyna-g...yna-pic-s.html
ISSUE
Member Lama is in the process of modding his 2007 FXDC into a club style or thug style bike (known today as outlaw bikes) Asks members to provide inspiration and post pictures of their own bikes. Members show off their bikes.
Read below for the full discussion…
http://www.hdforums.com/forum/dyna-g...yna-pic-s.html
ISSUE
Member Lama is in the process of modding his 2007 FXDC into a club style or thug style bike (known today as outlaw bikes) Asks members to provide inspiration and post pictures of their own bikes. Members show off their bikes.
Read below for the full discussion…
Thug Style / Club Style Dyna pic's
#5021
Thanks Bobber, Yes to both rim sizes, Metz ME880 90/90 (wider than regular 90 size) 21 front, 180/55 18 rear
#5022
finally got my winter mods done! 500 miles done, a lot more to come!
95" with andrews 37g cams, 10.5:1 wiseco's, stage 2 heads, blahblahblah
bassani 2-1
bagger brembos (11.8" floaters waiting to be installed, but calipers alone are much better)
sputhe stabilizer (well worth the money!)
Michelin commander II's on the shelf for once i burn these off this week.
Updated LED day maker on the way.
95" with andrews 37g cams, 10.5:1 wiseco's, stage 2 heads, blahblahblah
bassani 2-1
bagger brembos (11.8" floaters waiting to be installed, but calipers alone are much better)
sputhe stabilizer (well worth the money!)
Michelin commander II's on the shelf for once i burn these off this week.
Updated LED day maker on the way.
#5023
Any of you with 06-07 dynas have a parts catalog? I need part numbers for the 10 spoke cast rear wheel. Both the black and silver. Aren't they 17 x 4.5? With 1" bearings? I'm hunting down a used one. Bearings converted to 3/4 to go on my rear and fit a 180 rear tire on my fxdx. I also need part numbers for 02-05 dyna rear fenders and what models they correspond to. Didn't dyna fenders go wider in 02? I need to retrofit a newer wider fender. preferably a dx fender.
#5024
Any of you with 06-07 dynas have a parts catalog? I need part numbers for the 10 spoke cast rear wheel. Both the black and silver. Aren't they 17 x 4.5? With 1" bearings? I'm hunting down a used one. Bearings converted to 3/4 to go on my rear and fit a 180 rear tire on my fxdx. I also need part numbers for 02-05 dyna rear fenders and what models they correspond to. Didn't dyna fenders go wider in 02? I need to retrofit a newer wider fender. preferably a dx fender.
41032-06 Silver wheel 17"
43333-06 Black
Last edited by jpace024; 05-13-2014 at 02:25 PM.
#5025
Go here, http://www.ronnies.com/micro.htm, microfiche diagrams and part numbers for most models, useful site.
#5026
I love your bike! Your bike is what mine aspires to become. It looks perfect. I wish I would of got the T-header instead of the pro-pipe. Does the superbrace really make a difference? I've been looking at them but can't decide if I want to pay that much for one? Killer bike man!
#5027
I love your bike! Your bike is what mine aspires to become. It looks perfect. I wish I would of got the T-header instead of the pro-pipe. Does the superbrace really make a difference? I've been looking at them but can't decide if I want to pay that much for one? Killer bike man!
#5028
Avirex, I just saw a nasty post on instagram about a dude running those handguards. Don't think his were Powermads, but they were the type that don't fasten to the bar end, just at the controls. He was splitting traffic, clipped a mirror and the guard folded back onto his brake lever, locked up the front brake and pitched him over the bars. He got roughed up and the bike pretty bad too. Just a heads up on that style. Otherwise your bike looks killer.
#5029
Haven't figured out how to quote people on my phone, but I just wanted to thank everyone for the compliments! I'm very happy with how it came out, glad to finally be where I want it. Now it's time to stack on the miles! Enjoy the ride!