Last edit by: IB Advertising
Thug Style / Club Style Dyna pic's
http://www.hdforums.com/forum/dyna-g...yna-pic-s.html
ISSUE
Member Lama is in the process of modding his 2007 FXDC into a club style or thug style bike (known today as outlaw bikes) Asks members to provide inspiration and post pictures of their own bikes. Members show off their bikes.
Read below for the full discussion…
http://www.hdforums.com/forum/dyna-g...yna-pic-s.html
ISSUE
Member Lama is in the process of modding his 2007 FXDC into a club style or thug style bike (known today as outlaw bikes) Asks members to provide inspiration and post pictures of their own bikes. Members show off their bikes.
Read below for the full discussion…
Thug Style / Club Style Dyna pic's
#4302
Thanks Denny. No, I just learned how to use the iPhone camera better. It had some sort of filter that I didn't know about.
Does it look orange now?
Does it look orange now?
Last edited by SLV; 03-10-2014 at 11:29 AM.
#4305
Skateboard wheels. They're on the brake side too,
The brake side is locked to prevent rotation, but the shift pedal spins freely.
The brake side is locked to prevent rotation, but the shift pedal spins freely.
#4306
niice you used to sk8?
haha just noticed your avatar now
mind if I copy that idea? first time i seen or noticed it on a bike..got some spitfires kickin around..use stock peg hardware with bearings?
haha just noticed your avatar now
mind if I copy that idea? first time i seen or noticed it on a bike..got some spitfires kickin around..use stock peg hardware with bearings?
Last edited by JonnyLew; 03-10-2014 at 01:17 PM.
#4307
Yes, the shifter happens to use. 5/16" hardware, so it just bolts on. You have to play with the spacers a bit.
I have a thread with details somewhere.
#4308
Here you go. Skate wheel shifter.
https://www.hdforums.com/forum/12194085-post2020.html
https://www.hdforums.com/forum/12194109-post2021.html
https://www.hdforums.com/forum/12194085-post2020.html
https://www.hdforums.com/forum/12194109-post2021.html
#4309
Got my badlander seat in the mail that I bought from a forum member. Looks so much better than the cuppycake stock wide glide seat
Only "problem" I ran into was the fact that even though I'm running a super glide fender, the hole in the fender was originally set up to run a wide glide seat, which is about an inch longer. Have it mocked up right now, going to jack the bike up later and move the bolt to the original hole. A lot more comfortable and I feel like I'm moved down and back just a bit which is exactly what I wanted. Just waiting on my front turn signal relocaters then I should be done. Until I have money for saddle bags, that is...
Only "problem" I ran into was the fact that even though I'm running a super glide fender, the hole in the fender was originally set up to run a wide glide seat, which is about an inch longer. Have it mocked up right now, going to jack the bike up later and move the bolt to the original hole. A lot more comfortable and I feel like I'm moved down and back just a bit which is exactly what I wanted. Just waiting on my front turn signal relocaters then I should be done. Until I have money for saddle bags, that is...
#4310
Here you go. Skate wheel shifter.
https://www.hdforums.com/forum/12194085-post2020.html
https://www.hdforums.com/forum/12194109-post2021.html
https://www.hdforums.com/forum/12194085-post2020.html
https://www.hdforums.com/forum/12194109-post2021.html