Last edit by: IB Advertising
Thug Style / Club Style Dyna pic's
http://www.hdforums.com/forum/dyna-g...yna-pic-s.html
ISSUE
Member Lama is in the process of modding his 2007 FXDC into a club style or thug style bike (known today as outlaw bikes) Asks members to provide inspiration and post pictures of their own bikes. Members show off their bikes.
Read below for the full discussion…
http://www.hdforums.com/forum/dyna-g...yna-pic-s.html
ISSUE
Member Lama is in the process of modding his 2007 FXDC into a club style or thug style bike (known today as outlaw bikes) Asks members to provide inspiration and post pictures of their own bikes. Members show off their bikes.
Read below for the full discussion…
Thug Style / Club Style Dyna pic's
#4011
2012 Street Bob. Just installed. Full length Dyna (FXDC) fender. Custom dynamics brake light with integrated turn signals, smoked out black lens. Kuryakyn lay down license plate mount. Removed the stock turn signals.
Here's my parts list:
What I bought:
Harley parts:
Non-Harley:
Custom
I replaced the rear turn signal strut/stalk bolts with some stainless 5/16” x 1 1/2” bolts, washers and nuts. I think I can get away with a 1” length, however. (Home Depot)
In another thread, somewhere, I found this link that shows all the original HD parts and numbers.
http://www.granitestateharleystore.c...R%7c%7e1%5cGV4
Here's my parts list:
What I bought:
Harley parts:
- 634-06DH FENDER, rear (vivid black) (eBay - used)
- 3022A SCREW (holds base to fender) (HD dealer)
- 7964 NUT (clips onto tab on fender, 3022A screw goes through base into this) (HD dealer)
- 68066-99A BASE ASSEMBLY (stock tail light base assembly for many models) (HD dealer)
- 68026-99 SCREW (2) holds light to base. (HD dealer)
- 68770-02B HARNESS ASSEMBLY (replaces stock wire harness. connects under seat, adhesive backing to stick it to the underside of the fender and runs to the tail
Non-Harley:
Custom
- Dynamics Black LED Integrated Laydown Taillight w/ Turn Signals & Window (P/N: GEN2I-LDW-S-B) (eBay)
- Kuryakyn Curved Laydown License Plate Frame (P/N: 9171 Chrome, 3148 Black) (eBay) I’ve heard the Drag Specialties costs less and lays down more.
I replaced the rear turn signal strut/stalk bolts with some stainless 5/16” x 1 1/2” bolts, washers and nuts. I think I can get away with a 1” length, however. (Home Depot)
In another thread, somewhere, I found this link that shows all the original HD parts and numbers.
http://www.granitestateharleystore.c...R%7c%7e1%5cGV4
Last edited by b2inUT; 02-17-2014 at 02:39 PM. Reason: edited out copy & paste artifacts.
#4012
2012 Street Bob. Just installed. Full length Dyna (FXDC) fender. Custom dynamics brake light with integrated turn signals, smoked out black lens. Kuryakyn lay down license plate mount. Removed the stock turn signals.
http://youtu.be/0bcFGF1eJfU
Here's my parts list:
What I bought:
Harley parts:
59
Non-Harley:
Custom
I replaced the rear turn signal strut/stalk bolts with some stainless 5/16” x 1 1/2” bolts, washers and nuts. I think I can get away with a 1” length, however. (Home Depot)
In another thread, somewhere, I found this link that shows all the original HD parts and numbers.
http://www.granitestateharleystore.c...R%7c%7e1%5cGV4
http://youtu.be/0bcFGF1eJfU
Here's my parts list:
What I bought:
Harley parts:
59
- 634-06DH FENDER, rear (vivid black) (eBay - used)
- 3022A SCREW (holds base to fender) (HD dealer)
- 7964 NUT (clips onto tab on fender, 3022A screw goes through base into this) (HD dealer)
- 68066-99A BASE ASSEMBLY (stock tail light base assembly for many models) (HD dealer)
- 68026-99 SCREW (2) holds light to base. (HD dealer)
- 68770-02B HARNESS ASSEMBLY (replaces stock wire harness. connects under seat, adhesive backing to stick it to the underside of the fender and runs to the tail
Non-Harley:
Custom
- Dynamics Black LED Integrated Laydown Taillight w/ Turn Signals & Window (P/N: GEN2I-LDW-S-B) (eBay)
- Kuryakyn Curved Laydown License Plate Frame (P/N: 9171 Chrome, 3148 Black) (eBay) I’ve heard the Drag Specialties costs less and lays down more.
I replaced the rear turn signal strut/stalk bolts with some stainless 5/16” x 1 1/2” bolts, washers and nuts. I think I can get away with a 1” length, however. (Home Depot)
In another thread, somewhere, I found this link that shows all the original HD parts and numbers.
http://www.granitestateharleystore.c...R%7c%7e1%5cGV4
#4013
B2...nice. I like this mod....visually I prefer the look of the full fender...even though I have the full fender with my 02, I had run a aftermarket tail/ brake/signal setup for awhile...after following this thread I have decide to back to an original look but integrated setup as you describe..including lo pro smoked and laydown...got majority of those parts off "The Bay", harness etc, ... Good look B2, def a good look....
#4014