Last edit by: IB Advertising
Thug Style / Club Style Dyna pic's
http://www.hdforums.com/forum/dyna-g...yna-pic-s.html
ISSUE
Member Lama is in the process of modding his 2007 FXDC into a club style or thug style bike (known today as outlaw bikes) Asks members to provide inspiration and post pictures of their own bikes. Members show off their bikes.
Read below for the full discussion…
http://www.hdforums.com/forum/dyna-g...yna-pic-s.html
ISSUE
Member Lama is in the process of modding his 2007 FXDC into a club style or thug style bike (known today as outlaw bikes) Asks members to provide inspiration and post pictures of their own bikes. Members show off their bikes.
Read below for the full discussion…
Thug Style / Club Style Dyna pic's
#3501
I must be blind but what brand of light is this? I see Ohio tags, I want the same set-up but was wondering if I'd have trouble in Ohio.
Last edited by chickenhauler; 01-07-2014 at 11:48 AM.
#3502
Isn't it great? I know we need rain but it's awesome still taking the bike to work in January. I plasti-dipped my wheels and lowers this weekend, making sure I want to do a semi gloss black before the front end comes apart and everything goes to powder coat.. Although until it starts raining I dunno when I'm going to want to have the bike down...
#3503
By the way there are made by custom dynamics
#3504
http://www.ebay.com/itm/Smoke-LED-Ta...447777&vxp=mtr
Says not DOT approved but I dont have any problems.
My sportster barely has a brake light at all and I never get problems with that either
Says not DOT approved but I dont have any problems.
My sportster barely has a brake light at all and I never get problems with that either
#3505
Join Date: Nov 2012
Location: The Whale's Vagina
Posts: 2,291
Likes: 0
Received 11 Likes
on
11 Posts
The 3M disc locks are easily removed if it doesn't work out for you. If it does, you can drill and fasten it permanently.
I can post some measurements tonight if you want them.
#3506
Join Date: Nov 2012
Location: The Whale's Vagina
Posts: 2,291
Likes: 0
Received 11 Likes
on
11 Posts
If they were flat/satin I would trade ya. I am painting the mid section of the pipe that the heatshields dont cover, up to the weld point for the end can, with DEI high heat. So I want the shields to match up to the pipe. I am going to scotchbrite the muffler for a brushed steel look. The chrome got f'd up on the muffler so I figured I'd try something different.
#3507
I must be blind but what brand of light is this? I see Ohio tags, I want the same set-up but was wondering if I'd have trouble in Ohio.
I have the integrated tailight from D2Moto and I live in Ohio. I have had it on my bike for a couple years. No issues.
I have the integrated tailight from D2Moto and I live in Ohio. I have had it on my bike for a couple years. No issues.
#3509
http://www.ebay.com/itm/Smoke-LED-Ta...447777&vxp=mtr
Says not DOT approved but I dont have any problems.
My sportster barely has a brake light at all and I never get problems with that either
Says not DOT approved but I dont have any problems.
My sportster barely has a brake light at all and I never get problems with that either
#3510
It's got some flex in it that would allow you to adjust it to the curve of the fairing. It doesn't mate up perfectly with the HD fairing unless you "squeeze" into place.
The 3M disc locks are easily removed if it doesn't work out for you. If it does, you can drill and fasten it permanently.
I can post some measurements tonight if you want them.
The 3M disc locks are easily removed if it doesn't work out for you. If it does, you can drill and fasten it permanently.
I can post some measurements tonight if you want them.