Yea t bars will change the way you feel about your bike. Got them done yesterday. And now it's so hard to get off the bike. Went with the 12in Wild1s

 

Here's how they came out

 

Looks sick man! What part of south Florida are you in?

 

I've noticed a good bit of difference at highway speeds, get a bit of buffeting, but not nearly as much as I was without it.

Probably going with 16" West Coast MX bars. I'm torn between the 14's and 16's though. I don't want too much pull back and end up eating my bars.

 

Good thought. Sit on a few bikes if you can. I thought I wanted the tallest risers but ended up with 11" (plus about 2 - 2 1/2 for the bars.). The taller they are, the farther back they get. Your height and reach may come into play. I'm 6' 2" and they fit really well.

 

Mine were the same way. I just bent the brackets. Then I just ditched the flimsy ness all together.

 

i thought the same thing originally, i installed 13in risers + the pro tapers and soon realized it wasn't for me. so i swapped the 13s for 11s and they are absolutely perfect.

SLV seems like you started something with the skate wheels, we will probably be seeing more of them in the near future.

 

Yeah, I'm 6'4". The height on the bars I have now is nice (16"), I have them set at 0" pull back. I have to stretch just a hair, but I might adjust to 3" to see where that sits because I figure that will be closer to what I'll get with the T-Bars.

 

That's funny. I changed my mind from 13" to 11" based on how your bike looks. Worked out perfect.

I'm just getting started. Working on a cool TS relocation/tail light idea for short fender Street Bobs.

At 6'4", I'd think 16" T-Bars would be in your chin unless you got some of the Carlini T-Bars that bend forward.

 

If you look at the last pic I posted, the apes have on there, with their current position, almost have my arms straight out. Granted, they are also wider than T-bars. I think I might mock up a set outta PVC first before I order. If I'm not mistaken, I believe WC T-Bars run an inch large, so that might play well if I decide to get 14s over 16s. One of my club brothers is running 10" risers with stock bars, and my arms sit a little too low for me, but with the reduced reach seat he's got, the reach was fine.

Like I said, I think I'll try a mock up first, then go from there.