Last edit by: IB Advertising
Thug Style / Club Style Dyna pic's
http://www.hdforums.com/forum/dyna-g...yna-pic-s.html
ISSUE
Member Lama is in the process of modding his 2007 FXDC into a club style or thug style bike (known today as outlaw bikes) Asks members to provide inspiration and post pictures of their own bikes. Members show off their bikes.
Read below for the full discussion…
http://www.hdforums.com/forum/dyna-g...yna-pic-s.html
ISSUE
Member Lama is in the process of modding his 2007 FXDC into a club style or thug style bike (known today as outlaw bikes) Asks members to provide inspiration and post pictures of their own bikes. Members show off their bikes.
Read below for the full discussion…
Thug Style / Club Style Dyna pic's
#3371
Yea t bars will change the way you feel about your bike. Got them done yesterday. And now it's so hard to get off the bike. Went with the 12in Wild1s
Last edited by Nate0352; 12-29-2013 at 05:40 AM.
#3374
I've noticed a good bit of difference at highway speeds, get a bit of buffeting, but not nearly as much as I was without it.
Probably going with 16" West Coast MX bars. I'm torn between the 14's and 16's though. I don't want too much pull back and end up eating my bars.
Probably going with 16" West Coast MX bars. I'm torn between the 14's and 16's though. I don't want too much pull back and end up eating my bars.
#3375
Good thought. Sit on a few bikes if you can. I thought I wanted the tallest risers but ended up with 11" (plus about 2 - 2 1/2 for the bars.). The taller they are, the farther back they get. Your height and reach may come into play. I'm 6' 2" and they fit really well.
#3376
Mine were the same way. I just bent the brackets. Then I just ditched the flimsy ness all together.
#3377
SLV seems like you started something with the skate wheels, we will probably be seeing more of them in the near future.
#3378
Yeah, I'm 6'4". The height on the bars I have now is nice (16"), I have them set at 0" pull back. I have to stretch just a hair, but I might adjust to 3" to see where that sits because I figure that will be closer to what I'll get with the T-Bars.
#3379
Originally Posted by fordaith
Yeah, I'm 6'4". The height on the bars I have now is nice (16"), I have them set at 0" pull back. I have to stretch just a hair, but I might adjust to 3" to see where that sits because I figure that will be closer to what I'll get with the T-Bars.
#3380
Like I said, I think I'll try a mock up first, then go from there.