Last edit by: IB Advertising
Thug Style / Club Style Dyna pic's
http://www.hdforums.com/forum/dyna-g...yna-pic-s.html
ISSUE
Member Lama is in the process of modding his 2007 FXDC into a club style or thug style bike (known today as outlaw bikes) Asks members to provide inspiration and post pictures of their own bikes. Members show off their bikes.
Read below for the full discussion…
http://www.hdforums.com/forum/dyna-g...yna-pic-s.html
ISSUE
Member Lama is in the process of modding his 2007 FXDC into a club style or thug style bike (known today as outlaw bikes) Asks members to provide inspiration and post pictures of their own bikes. Members show off their bikes.
Read below for the full discussion…
Thug Style / Club Style Dyna pic's
Looks like a refurb unit to me. Mine have always looked pretty smooth. They're prone to breaking though so I get dudes buying all the broken ones and rewelding them back up...this is sloppy though.
The following users liked this post:
M Oclaf (03-29-2023)
For those of you guys running a dual gauge setup on your bars (Mickey Mouse), can you confirm what your welds look like? I just got this brand-new OEM piece from Ronnie's today and it looks like ****. You can't really see it in the pic, but there's a pockmark in the powder too that's showing rust beneath. I reached out to Ronnie's hoping to exchange but was wondering if they're all this way.
The following users liked this post:
M Oclaf (03-29-2023)
You can say that again! I can't imagine for one, going to the trouble of making the three nice pieces just to make it look like garbage with a bad weld, send it back!
It looks like it's gonna break from looking at it!
It looks like it's gonna break from looking at it!
The following users liked this post:
M Oclaf (03-29-2023)
Ronnie's said: "i will send a return label to your email, i can get the rust spot covered harley wont do anything about the looks of the weld"
The following 3 users liked this post by DynaKid94:
For those of you guys running a dual gauge setup on your bars (Mickey Mouse), can you confirm what your welds look like? I just got this brand-new OEM piece from Ronnie's today and it looks like ****. You can't really see it in the pic, but there's a pockmark in the powder too that's showing rust beneath. I reached out to Ronnie's hoping to exchange but was wondering if they're all this way.
The following users liked this post:
DynaKid94 (03-23-2023)
Finally got in my club style seat trim sign. This was made by Shecnc on Instagram. She designed these based off old school car clubs. I had to have one and love it.
The following users liked this post:
Dynawobble (03-23-2023)
That's legit!
The following users liked this post:
the_huber_show (03-23-2023)
I got my bracket from Speedkings and it's pretty clean. Like Shitface said they are prone to breaking and they get refurbished quite a bit. I would definitely try to get that exchanged. I guess you can't really see the welds on mine in this picture. Bike is currently at my buddy's house or I'd snap a better picture of the welds.
The following users liked this post:
Dynawobble (03-23-2023)