Last edit by: IB Advertising
Thug Style / Club Style Dyna pic's
http://www.hdforums.com/forum/dyna-g...yna-pic-s.html
ISSUE
Member Lama is in the process of modding his 2007 FXDC into a club style or thug style bike (known today as outlaw bikes) Asks members to provide inspiration and post pictures of their own bikes. Members show off their bikes.
Read below for the full discussion…
http://www.hdforums.com/forum/dyna-g...yna-pic-s.html
ISSUE
Member Lama is in the process of modding his 2007 FXDC into a club style or thug style bike (known today as outlaw bikes) Asks members to provide inspiration and post pictures of their own bikes. Members show off their bikes.
Read below for the full discussion…
Thug Style / Club Style Dyna pic's
What do you have them mounted to ?...b.
Scored some HD highway footpeg brackets, welded a couple of small spacers to them and painted them w/appliance epoxy.
Used some brackets I made out of 1/8 inch steel strap until I could get the highway brackets.
Used some brackets I made out of 1/8 inch steel strap until I could get the highway brackets.
The following users liked this post:
beanoboy (08-16-2017)
I just started wheeling my bike and am looking at installing the case saver cause you never know.
I'm going to pull it off and go with the heat shields. It pours heat off it at a dead stop and not fun.
I'm good enough to get myself into trouble, nowhere near the skill of some of these guys....
Originally Posted by Jpatterson317
Here is my 2015 fxdf
bassani rr3, biltwell murdock risers and high tracker bars, saddlemen seat, FP3, deviant fxrd fairing, Viking bags, SE air cleaner
bassani rr3, biltwell murdock risers and high tracker bars, saddlemen seat, FP3, deviant fxrd fairing, Viking bags, SE air cleaner
Which Viking Bags are you running, and do they have enough storage for an overnight trip? Looking at possibly going the same route.
Originally Posted by Jpatterson317
my total bar rise is 12
i have 8 inch risers with 4 inch rise track bars
i have 8 inch risers with 4 inch rise track bars
Thanks, trying to decide if I should order the plate with my fairing to put my gauges in the fairing itself or on the bars.
Last edited by Sunday; 08-16-2017 at 12:53 PM.