Last edit by: IB Advertising
Thug Style / Club Style Dyna pic's
http://www.hdforums.com/forum/dyna-g...yna-pic-s.html
ISSUE
Member Lama is in the process of modding his 2007 FXDC into a club style or thug style bike (known today as outlaw bikes) Asks members to provide inspiration and post pictures of their own bikes. Members show off their bikes.
Read below for the full discussion…
http://www.hdforums.com/forum/dyna-g...yna-pic-s.html
ISSUE
Member Lama is in the process of modding his 2007 FXDC into a club style or thug style bike (known today as outlaw bikes) Asks members to provide inspiration and post pictures of their own bikes. Members show off their bikes.
Read below for the full discussion…
Thug Style / Club Style Dyna pic's
2016 Dyna Low Rider S with a few upgrades:
SE 117ci Kit
SE Billet Cam Plate
SE High Volume Oil Pump
SE Pro Super Tuner (117ci Baseline tune and Dyno tune)
Bassani Road Rage 2-into-1 Exhaust
Big Bear Choppers Front and Rear Motor Mounts
Arlen Ness 15" Big Brake Rotors
Lyndall Extreme Performance Brake Pads
Metzeler ME 888 Tires
Lucky Dave's Diamond Stitched Seat
Lucky Dave's 12" San Diego MX T-Bars
RSD Tracker Grips
HD Braided Brake and Clutch Cables
HD Chopped and Powder Coated Levers
HD Flush Mount Gas Cap and Gauge
HD Quarter Fairing (Vivid Black)
BungKing Quarter Fairing Brackets (Dyna 49mm Forks)
Deadbeat Customs T-Bar Bag
MoonsMC LED Replacement Bulb (4000 Lumins)
DynoJet Power Vision (Monitoring and Logging)
Bike was dynoed yesterday after 600 mile break-in and the fluids changed. She put down: 117hp / 127trq
SE 117ci Kit
SE Billet Cam Plate
SE High Volume Oil Pump
SE Pro Super Tuner (117ci Baseline tune and Dyno tune)
Bassani Road Rage 2-into-1 Exhaust
Big Bear Choppers Front and Rear Motor Mounts
Arlen Ness 15" Big Brake Rotors
Lyndall Extreme Performance Brake Pads
Metzeler ME 888 Tires
Lucky Dave's Diamond Stitched Seat
Lucky Dave's 12" San Diego MX T-Bars
RSD Tracker Grips
HD Braided Brake and Clutch Cables
HD Chopped and Powder Coated Levers
HD Flush Mount Gas Cap and Gauge
HD Quarter Fairing (Vivid Black)
BungKing Quarter Fairing Brackets (Dyna 49mm Forks)
Deadbeat Customs T-Bar Bag
MoonsMC LED Replacement Bulb (4000 Lumins)
DynoJet Power Vision (Monitoring and Logging)
Bike was dynoed yesterday after 600 mile break-in and the fluids changed. She put down: 117hp / 127trq
Nice torque man, you better go get a bigger bell to save your hide now
LMFAO! I need to tuck that thing up under the frame rails. The torque curve is really nice - really flat, can't wait for some warmer weather! Rode for about 3 hours yesterday but the cold finally won. How do you like those bags, and how easily do they come off/go back on?
Good numbers. I'm going to throw some cams in my 110 pretty soon, but not doing the 117 for a while (blew the budget elsewhere). I love the torque of the 110, so I can only imagine the bump from the 117 is great.
Well since the weather sucks and I'm stuck getting everything ready for this weekend, here's a picture for me to stare at and make vroom noises and imagine I'm riding...
Attachment 621539
Attachment 621539
Ha agreed, weather here is ugly. In laws coming over tomorrow afternoon for Christmas so I'm taking the bike out on a preemptive stress relief ride.
Bags are the bomb, they go on and off easier than Mchad can pick an ugly seat
The following users liked this post:
mirrmu (01-02-2017)
I really dig the look of the risers and bars. Unfortunately, I can't swing that kind of cash right now. So I got to thinking why not just put a bar pad on my bars. First I measured a Pro Taper pad and it's just two wide to fit so I decided to make my own.
This is just a prototype so to speak. It's made out of vinyl and Velcro. I also hand sew the seams. I do t have a sewing machine so I did the best I could. The seams look like ****, but it's cleaner than the rough jagged edge of the vinyl.
I'll probably redo it in leather after a trial period to see how I like it. Maybe I throw some patches on it or something.
This is just a prototype so to speak. It's made out of vinyl and Velcro. I also hand sew the seams. I do t have a sewing machine so I did the best I could. The seams look like ****, but it's cleaner than the rough jagged edge of the vinyl.
I'll probably redo it in leather after a trial period to see how I like it. Maybe I throw some patches on it or something.
I really dig the look of the risers and bars. Unfortunately, I can't swing that kind of cash right now. So I got to thinking why not just put a bar pad on my bars. First I measured a Pro Taper pad and it's just two wide to fit so I decided to make my own.
This is just a prototype so to speak. It's made out of vinyl and Velcro. I also hand sew the seams. I do t have a sewing machine so I did the best I could. The seams look like ****, but it's cleaner than the rough jagged edge of the vinyl.
I'll probably redo it in leather after a trial period to see how I like it. Maybe I throw some patches on it or something.
This is just a prototype so to speak. It's made out of vinyl and Velcro. I also hand sew the seams. I do t have a sewing machine so I did the best I could. The seams look like ****, but it's cleaner than the rough jagged edge of the vinyl.
I'll probably redo it in leather after a trial period to see how I like it. Maybe I throw some patches on it or something.
I dig that, always love the look of bar pads.
And ray looking clean as always, that pipe has such good color to it!
The following users liked this post:
SquishyLowRider (12-24-2016)