Last edit by: IB Advertising
Thug Style / Club Style Dyna pic's
http://www.hdforums.com/forum/dyna-g...yna-pic-s.html
ISSUE
Member Lama is in the process of modding his 2007 FXDC into a club style or thug style bike (known today as outlaw bikes) Asks members to provide inspiration and post pictures of their own bikes. Members show off their bikes.
Read below for the full discussion…
http://www.hdforums.com/forum/dyna-g...yna-pic-s.html
ISSUE
Member Lama is in the process of modding his 2007 FXDC into a club style or thug style bike (known today as outlaw bikes) Asks members to provide inspiration and post pictures of their own bikes. Members show off their bikes.
Read below for the full discussion…
Thug Style / Club Style Dyna pic's
#1094
Forking by Frank. He'll take care of whatever length/diameter tubes you need, also cuts down stock tubes.
http://www.frankmain.qpg.com/
http://www.frankmain.qpg.com/
#1095
Before I tossed the ness fairng back on. Suspension wise it has 2" over front tubes with racetek springs and ~14" hagon shocks in the rear. Rides awesome. Very different from when I bought it. Had 16" apes, no powder coat, wide glide trees, 11" progressive shocks. Much more happy now.
Last edited by shane4585; 11-22-2012 at 12:12 AM.
#1096
That looks like a screamin eagle brace.
For everyone asking about the fork tubes, stock wide glide tubes are 2" longer. I'd love to find some 1" longer, 2" seems like a little much but maybe not.
For everyone asking about the fork tubes, stock wide glide tubes are 2" longer. I'd love to find some 1" longer, 2" seems like a little much but maybe not.
#1097
My 2010 Street bob so far...
I just bought a used 2008 superglide fender and smoked low profile run/stop/turn taillight to replace the ugly 10' fender. After I throw that on im going to focus on front and rear suspension, A little more powdercoating, maybe dual brakes, then on to motor work.
I just bought a used 2008 superglide fender and smoked low profile run/stop/turn taillight to replace the ugly 10' fender. After I throw that on im going to focus on front and rear suspension, A little more powdercoating, maybe dual brakes, then on to motor work.
#1098
My 2010 Street bob so far...
I just bought a used 2008 superglide fender and smoked low profile run/stop/turn taillight to replace the ugly 10' fender. After I throw that on im going to focus on front and rear suspension, A little more powdercoating, maybe dual brakes, then on to motor work.
I just bought a used 2008 superglide fender and smoked low profile run/stop/turn taillight to replace the ugly 10' fender. After I throw that on im going to focus on front and rear suspension, A little more powdercoating, maybe dual brakes, then on to motor work.
#1100
The standard Hagon setup. Non adjustable dampening. $200, any length, setup for your weight. I like them and the price is damn hard to beat.