Has anyone mounted a 2010 WG license plate bracket on another Dyna??
#11
Your link didn't work for me. I found this https://www.hdforums.com/forum/dyna-glide...ihed-pics.html
I added the pics of rear brake lights and LED lights on stock WG Bracket.
I added the pics of rear brake lights and LED lights on stock WG Bracket.
Last edited by Tuffstang; 10-22-2009 at 12:00 AM.
#12
Great job on this one ... I just don't have any talent in that kind of fabrication ... would you consider making/selling another bracket? I have the WG License plate bracket for my Fat Bob, but don't have the resources to fabricate the bracket. I like how yours turned out. Any issues on sharp cornering???
#13
#14
No clearance issues, on the jiffy there's still 6" clearance.
The reason I went with the HD WG plate is it's HD, Florida horizontal law, it folds away, has built in LED's and like the look and finish. Oh yeah cost me $40 total parts. Also wanted to get the lisence plate off the fender to possibly chopp the fender or cut up 10 WG fender.
The reason I went with the HD WG plate is it's HD, Florida horizontal law, it folds away, has built in LED's and like the look and finish. Oh yeah cost me $40 total parts. Also wanted to get the lisence plate off the fender to possibly chopp the fender or cut up 10 WG fender.
#16
No clearance issues, on the jiffy there's still 6" clearance.
The reason I went with the HD WG plate is it's HD, Florida horizontal law, it folds away, has built in LED's and like the look and finish. Oh yeah cost me $40 total parts. Also wanted to get the lisence plate off the fender to possibly chopp the fender or cut up 10 WG fender.
The reason I went with the HD WG plate is it's HD, Florida horizontal law, it folds away, has built in LED's and like the look and finish. Oh yeah cost me $40 total parts. Also wanted to get the lisence plate off the fender to possibly chopp the fender or cut up 10 WG fender.
#17
#18
hi Tuffstang
that looks great, i was wandering if i can ask you couple of things as i want to do the same thing on my street bob 2014 and want to confirm the parts i need etc.
thanks
that looks great, i was wandering if i can ask you couple of things as i want to do the same thing on my street bob 2014 and want to confirm the parts i need etc.
thanks
Fabricated this up to mount the bracket to the belt guard bolt. Still not completed needs some small adjustments to make me happy. I made a connector that plugs into the stock taillight board. I got the parts from HD parts counter. This port is unused (FLH plug). From there the wires go along the underside of the fender with the stock wiring harness to under the seat. There I will make another connection to be able to disconnect for service (tire). Then along the swing arm to the 2010 WG stock LED lights. Ran up to the dealer today and clears and is stable. I plugged the hole in the fender with the HD logo caps for the seat and one for the aux light.
#19