skip3406 posted a photo linked to the parts catalog above, here it is again below:

 

Yes. These are the same risers and clamp that came on the 05 Low Riders. Beginning in 06 the idiot lights were integrated into the clamp, so unless you want dead idiot lights, these are the risers you want, not 06 and up.

 

Here's the original Low Rider setup:

 

Gary- I am considering these risers too. Are you able to run the stock length cables/brake line?

 

Yup, stock cables and brake line are long enough. But you will have to re-orient the flexible brake line by unfastening the two d-clips that hold it to the triple tree. (Do that before you unbolt the bars from the old risers.)

 

Do you guys know if these risers will work on my cvo Fat Boob? I have been looking for some pull back risers with no luck. I have the tack mounted on the top clamp (stock).

 

These won't work if your bars are 1.25" like the std Fat Bob. These risers are for 1" bars.

 

Thanks I guess I will have to keep looking

 

The CVO Fat Bob does have different bars than the std model so yours may be 1". Have you checked?

 

I do have 1 1/4" bars.