dyno tune post for all
#32
RE: dyno tune post for all
I've attached my dyno run for a 1997 Dyna Wide Glide with an aftermarket cam (don't know which one), SE II slip on mufflers and a K&N muffler. I don't know of any other mods to the bike. I'm the 3rd owner and my buddy was the 2nd owner.
Numbers were:
73 HP
79 TQ
AFR's appear to be lean up top.
Dyno run was performed at Sabin Performance in Dallas (I-35 and Walnut Hill area) for $30.
Appreciate any comments, especially trying to get the picture fit. Unfortunately, the picture is winning.
[IMG]local://upfiles/18990/F31C92DBDB444EF8B354855252A4C5F4.jpg[/IMG]
Numbers were:
73 HP
79 TQ
AFR's appear to be lean up top.
Dyno run was performed at Sabin Performance in Dallas (I-35 and Walnut Hill area) for $30.
Appreciate any comments, especially trying to get the picture fit. Unfortunately, the picture is winning.
[IMG]local://upfiles/18990/F31C92DBDB444EF8B354855252A4C5F4.jpg[/IMG]
#33
RE: dyno tune post for all
The first pull on the dyno, the Vance and Hines big shots and the hypercharger were already installed, the second run is after the re mapping. My motor is completely stock, only the A/C and pipes were changed.
[IMG]local://upfiles/9328/9FC4F3427F544891972B1A04098608EB.jpg[/IMG]
[IMG]local://upfiles/9328/9FC4F3427F544891972B1A04098608EB.jpg[/IMG]
#35
RE: dyno tune post for all
HP= 73.1
Tq= 77.9
AFR was just about flat across the board 12.9-13.2
Mileage on mountain, backroad trips and open highway is consistant 49.9-50.7 mpg
around town is between 42-46 mpg
I did my own tuning with TFI.
Dyno Run by American Cycle Performance, Glen Burnie, Maryland
Tq= 77.9
AFR was just about flat across the board 12.9-13.2
Mileage on mountain, backroad trips and open highway is consistant 49.9-50.7 mpg
around town is between 42-46 mpg
I did my own tuning with TFI.
Dyno Run by American Cycle Performance, Glen Burnie, Maryland
#36
RE: dyno tune post for all
1998 80" Evo Wide Glide: 84-hp, 86-ft/lbs tq
Tuner: RC Cycle, Hayward, CA
Cost: $350
- K & N air filter
- Edelbrock Performer cylinder heads
- Edelbrock Performer intake
- Crane adjustable pushrods
- V-Thunder EVL-3020 cam (0.500" lift, 24-deg duration, 102-deg LSA)
- Dyna 2000 ignition
- SuperTrapp SuperMeg (Screamin Eagle) 2-1 exhaust
- stock Keihin carb (jetted accordingly)
Z
[IMG]local://upfiles/5626/E0FC4F02232949C8A7593665C53DE283.gif[/IMG]
Tuner: RC Cycle, Hayward, CA
Cost: $350
- K & N air filter
- Edelbrock Performer cylinder heads
- Edelbrock Performer intake
- Crane adjustable pushrods
- V-Thunder EVL-3020 cam (0.500" lift, 24-deg duration, 102-deg LSA)
- Dyna 2000 ignition
- SuperTrapp SuperMeg (Screamin Eagle) 2-1 exhaust
- stock Keihin carb (jetted accordingly)
Z
[IMG]local://upfiles/5626/E0FC4F02232949C8A7593665C53DE283.gif[/IMG]
#37
#38
RE: dyno tune post for all
2002 FXDWG3 SE 95" cast flat tops /SE Perf Heads/ Andrews TW31G cam w S&S gear drive and reed valve breather
Mikuni HSR 42 carb/ SE A/C /LMR -02 oil spring / SE adj pushrods / SE clutch kit / Dyna TC88-2 Ignition/ SE- II slip-ons / Cometic gasket kit with 0.030 head gasket
98.13hp/100.66lbs ft
[IMG]local://upfiles/14246/B8EC3E86F06B43E2B97EB2AD16C68B10.jpg[/IMG]
p.s for sale .. moving on to a Geezer Glide
Mikuni HSR 42 carb/ SE A/C /LMR -02 oil spring / SE adj pushrods / SE clutch kit / Dyna TC88-2 Ignition/ SE- II slip-ons / Cometic gasket kit with 0.030 head gasket
98.13hp/100.66lbs ft
[IMG]local://upfiles/14246/B8EC3E86F06B43E2B97EB2AD16C68B10.jpg[/IMG]
p.s for sale .. moving on to a Geezer Glide
#39
RE: dyno tune post for all
ORIGINAL: nidan
2002 FXDWG3 SE 95" cast flat tops /SE Perf Heads/ Andrews TW31G cam w S&S gear drive and reed valve breather
Mikuni HSR 42 carb/ SE A/C /LMR -02 oil spring / SE adj pushrods / SE clutch kit / Dyna TC88-2 Ignition/ SE- II slip-ons / Cometic gasket kit with 0.030 head gasket
98.13hp/100.66lbs ft
[IMG]local://upfiles/14246/B8EC3E86F06B43E2B97EB2AD16C68B10.jpg[/IMG]
p.s for sale .. moving on to a Geezer Glide
2002 FXDWG3 SE 95" cast flat tops /SE Perf Heads/ Andrews TW31G cam w S&S gear drive and reed valve breather
Mikuni HSR 42 carb/ SE A/C /LMR -02 oil spring / SE adj pushrods / SE clutch kit / Dyna TC88-2 Ignition/ SE- II slip-ons / Cometic gasket kit with 0.030 head gasket
98.13hp/100.66lbs ft
[IMG]local://upfiles/14246/B8EC3E86F06B43E2B97EB2AD16C68B10.jpg[/IMG]
p.s for sale .. moving on to a Geezer Glide
What were your AFR's?
#40