2010 Wide Glide Owners - Let's keep track of our mods....
#701
05-30-2010, 07:19 PM
There is a few bikes I have seen on this site with black bullet style head lights. They look pretty sick. I wanted to keep a little bit chrome.
#702
05-30-2010, 08:37 PM
5th Gear
Join Date: May 2010
Location: Kentucky
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
I just completed my tank lift using brackets that i made myself. There are no issues with the tank moving. The dynamic forces that the tank & brackets see are those caused by wind resistance. Almost all of the loads should be transmitted to the rear mounting bolt in this application. Long story short, do it yourself and don't worry about it.
#703
05-31-2010, 02:28 PM
Cruiser
Join Date: Feb 2010
Location: Dana Point
Posts: 105
Likes: 0
Received 0 Likes
on
0 Posts
Longer forks and balanced rake to match seem like the next step for a 2010 WG.
65MM inverted forks look pretty nice also:
http://www.harley-davidson-choppers.com/bodacious.htm
#704
05-31-2010, 05:38 PM
#705
06-01-2010, 04:51 AM
I drilled out the 3 rivets on each stock pipe, and the guts pretty much just slide out! You could remove everything inside the pipes if you wished I guess, although I just took out the fiberglass packing, and put everything ELSE back in. It's somewhat louder, but not a lot. Figured if I took EVERYTHING out of the pipes, I'd have to get it re-mapped, so haven't tried THAT yet.
#706
06-01-2010, 05:14 AM
5th Gear
Join Date: Nov 2009
Location: Southern IL
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
#707
06-01-2010, 05:18 AM
5th Gear
Join Date: Nov 2009
Location: Southern IL
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
#708
06-01-2010, 05:19 AM
5th Gear
Join Date: Nov 2009
Location: Southern IL
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts