***********

 

My 2010 Has the Black diamond grips, pegs, and controls. Vance and Hines Big radius pipes, Fuelpak tuner and Vance and Hines air intake kit. Bars, flush mount tank kit. Turn signal kit, all LEDs and added the fender lip led as well

 

. It's been a while here she is today, chrome lowers, drag bars, grips/levers, fender gone, mini sigs,1"riser spacers,air cleaner,foot pegs/controls, side covers,battery bag, bare bones seat,slammer shocks, mini sigs, licence plate relocated,pipes, it's parked in front of some local alley art!

 

The best thread ever has been pretty dead for a while now. Been very busy myself so I haven't visited much.
Hope all is well!

 

All right cmiller1014, here are my current mods, 6 years later:

I'm glad to have done all of these.
My original pipes change was to Vance and Hines straightshot slip ons with a stage 1 air filter and the V&H Fuelpack fuel management system. Too loud, even with the "quiet baffle". Much better sound and performance with my current setup. So what did you end up doing?

* Chrome front forks and triple tree
* Ricor 49mm Intimidator racing shocks, front (requires 10W fork oil - 5W is stock)
* Performance Machines 6 piston progressive chrome front brake caliper
* Lyndall lug drive ceramic/aluminum rotor, 11.8” Gemini chrome # NVLD-118FC20SC
* Lyndall 7202 Gold+ brake pads, front
* Harley leather front fork pouch
* Harley Daymaker LED chrome headlight # 6700144
* Roland Sands Design adjustable clutch and brake levers, chrome
* Harley heated grips, stealth 56750-04B
* Harley Extended turn signal buttons
* Diamondback braided steel brake lines, front and rear # 44889-05
* Harley leather tank pouch
* Jagg Slimline Oil Coolers two 6 row, 2 pass # 1200
* Jagg offset oil filter adaptor with thermostat # 4700
* Jagg antirotation device # 4600AR-A
* Harley Stealth foot pegs (4) with matching shifter and brake pegs
* S&S Teardrop air cleaner # 17-0450
* Terry Components Terminal Velocity TV-3 fuel management system
* Harley “street legal” Stage I ECU download
* Thunderheader exhaust pipes # 1031 (350408360385), chrome
* Thunderheader chrome heat shields # 1126 (290499119223)
* DEI titanium exhaust header wrap (2 wraps) with DEI black paint
* Boss Bags Dyna saddlebags # 31
* Harley detachable sissy bar with locking attachment - tall medallion style chrome upright # 52777-85A with mounting sideplates # 52866-06A
* Tall slip-over sissybar backrest pad
* Harley chrome bobtail fender rack # 56802-06A
* Corbin Custom black leather seat with flames
* Rear wheel wide tire kit # 43705-06
* Dunlop GT 502 rear tire 180/60-B17 MC 75V
* Dunlop GT 502 front tire 80/90-21 MC 54V
* Harley “Live to Ride” derby cover # 25340-99A
* Harley chrome flame gearshift linkage # 33838-09
* Bar & Shield Self-Locking Fuel Cap # 62803-97A
* Harley Classic chrome axle nut covers # 42034-07 rear; # 44117-07 front
* Custom Cycle Engineering front fork brace # 0415-0004 (or #0415-0003, not sure)
* Live to Ride license plate frame

I wish I could post photos. Don't know why they don't upload.


So what's coming up for my FXDWG?

1. RC Cycles port and polish my heads, 83 cc combustion chamber volume
2. Woods Knight Prowler TW-777 cam
3. New cam chain
4. AV&V valves and 5/16” valve guides
5. S&S Roller Rocker Arms
6. S&S Premium valve lifters
7. S&S Adjustable pushrods*
8. Knght Prowler W188 Valve Springs
9. Horsepower Inc 55mm Throttle Body for 1.710” intake runners: HPI-55D1-17
10. Horsepower Inc 4.9 g/sec HPI injectors
11. S&S Bore Kit: 107 cu in, highlighted fins, CP forged pistons (3.937 bore x stock 4.375 stroke)
12. Cometic exhaust gaskets
13. Clutch: AIM VP021-340 Performance Kit - VP95LT pressure plate with 340 lb spring
14. Chrome rocker cover nuts
15. Manual Compression release
16. 2006 Dyna 70 tooth rear sprocket
17. New Rear Drive Belt
18. TTS MasterTuner
19. Dyno Tune

Woods Knight Prowler TW-777 cam specs:

Part# .053 Timing Duration .053 Valve Lift Overlap

TW-777 22/42 Intake 244 **.575 * * 42* * *
44/20 Exhaust 244 **.575 * * *

Cheers.

 

By the way, it's a 2007

 

Not a 2010, but...

 

I've got a 2010 Wide Glide. Will post up photos when I get my bike out of the shop (Just storage for the winter) I had bought the motorcycle used and previous owner had a nice exhaust system and I just installed the daymaker headlight system. I'm planning on maybe adding a set of bags or luggage system and a different seat as after a 5-6 hour ride I'm a bit sore after

 

I have sone strong opinions about this:

Boss Bags, and
Corbin seats.

It's a nice ride over to Corbin in Hollister. Make an appointment and ride over. They'll make a custom seat to fit your ***. And ship your original seat back home to you.

Boss has a superior product and terrific service.

Old Crow

 

Some of the bikes in this thread are amazing! I don't have the best taste, but I can see when someone else does. Here's my 14, Rinehart crossbacks, SE stage 1 air filter, fuelpak, mustang daytripper seat. I've been reading this thread for days thinking about my winter mods. Next up is progressive 430's, haven't decided on chrome or black yet. I also want some drag bars and a sleek yet comfortable solo seat