2010 Wide Glide Owners - Let's keep track of our mods....
#2991
Thanks ! Since this bike was inspired by "60 Choppers I looked around for pics and most of them had upsweep exhaust, ... didnt find any manufacturer that did any that fits and the only exhaust that I really like was sikpipes but they didnt answer for a shipping quote so ... I had fun doing them, i'm not well equiped but it was funny
#2992
Attached a couple of pics of my WG. Below are links to the full size pics:
http://instagr.am/p/Ni5lYjr8sn/
http://instagr.am/p/Ni5fGJL8sj/
http://instagr.am/p/Ni5lYjr8sn/
http://instagr.am/p/Ni5fGJL8sj/
#2994
And some more pictures with the tire clearance for gtsouth. oh and you might have noticed that I tryied and made some mid floorboard that I ended up hating and remove because they were F????ing big but they looked somekind of good (to me)
Next mods will be blackening the top bracket of the shocks and bolts, blackening the signals at least the rear ones and get the visor lenses (my lenses melted...) Recut the rear fender a bit and repaint ... possibly try to do the same hot rod flame pattern on the 2 fenders. Get a bigger prettier front fender since this one is basically **** in the rain. Maybe new cam this winter and wheels ... I'm thinking of swapping bars again I like black bars might go for t bar not sure yet. Want to paint triple trees but not sure if it'll be nice with the chromed fork boots ...... I'm open for suggestions, comments and everything.
Next mods will be blackening the top bracket of the shocks and bolts, blackening the signals at least the rear ones and get the visor lenses (my lenses melted...) Recut the rear fender a bit and repaint ... possibly try to do the same hot rod flame pattern on the 2 fenders. Get a bigger prettier front fender since this one is basically **** in the rain. Maybe new cam this winter and wheels ... I'm thinking of swapping bars again I like black bars might go for t bar not sure yet. Want to paint triple trees but not sure if it'll be nice with the chromed fork boots ...... I'm open for suggestions, comments and everything.
#2995
Question for you who have changed the rear turn signals to smaller aftermarket ones:
What did you do (or how does it look) to get the area around the holes in the strut covers to look good? A little hard to explain but the strut covers got two holes which are covered by this 'big' cover which holds the turn signal in place. When changing to smaller ones they all have one shaft with the wire inside it, meaning you only use on of the holes and the other isn't covered neat and flush.
What did you do (or how does it look) to get the area around the holes in the strut covers to look good? A little hard to explain but the strut covers got two holes which are covered by this 'big' cover which holds the turn signal in place. When changing to smaller ones they all have one shaft with the wire inside it, meaning you only use on of the holes and the other isn't covered neat and flush.
#2997
Question for you who have changed the rear turn signals to smaller aftermarket ones:
What did you do (or how does it look) to get the area around the holes in the strut covers to look good? A little hard to explain but the strut covers got two holes which are covered by this 'big' cover which holds the turn signal in place. When changing to smaller ones they all have one shaft with the wire inside it, meaning you only use on of the holes and the other isn't covered neat and flush.
What did you do (or how does it look) to get the area around the holes in the strut covers to look good? A little hard to explain but the strut covers got two holes which are covered by this 'big' cover which holds the turn signal in place. When changing to smaller ones they all have one shaft with the wire inside it, meaning you only use on of the holes and the other isn't covered neat and flush.
1. Have anyone used these plates, together with aftermarket turns signals (there's a few posted in these thread with bikes that have changed the turns).
2. To all of you who have changed the turns to "mini's". How did you solve this 'problem'?
3. Does anyone know if there is a black version of the part number above (47531-06)? For obvious reasons.
I also got this tip, which looks like H-D's part on the picture, this will give you a hint on what I am talking about:
http://cgi.ebay.com/ws/eBayISAPI.dll...#ht_1167wt_924