2010 Wide Glide Owners - Let's keep track of our mods....
#1921
05-26-2011, 03:11 PM
2nd Gear
Join Date: May 2011
Location: saint john
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
#1922
05-26-2011, 10:01 PM
Hey Mazor... Can you tell me what Kind of bike the mid pegs came off of????.... I want some on my bike too
#1923
05-27-2011, 01:17 AM
Hey Redleg!
In my opinion it's much better now when you have raised it up! It will be even better when you get the risers for the bar but yes, keep the fairing up where you have it now. You could try to rotate it back just a hair, but that "look" will also change when you get the risers so you have to change it again.
In my opinion it's much better now when you have raised it up! It will be even better when you get the risers for the bar but yes, keep the fairing up where you have it now. You could try to rotate it back just a hair, but that "look" will also change when you get the risers so you have to change it again.
Ok gents. Looks like my risers wont be here till next week. Went ahead and raised the fairing up last night. Its up probably a good 2 to 3 inches over what it was before. That and its rotated forward more.
Be honest. What do you think?
Maybe i got used to the way it was before as it has been on there over a year, but im not sold on it being raised up just yet.......Maybe when i get the risers in and change the bar look it might change the look.
Maybe rotate the fairing back more?
Before and after pics below.....
Be honest. What do you think?
Maybe i got used to the way it was before as it has been on there over a year, but im not sold on it being raised up just yet.......Maybe when i get the risers in and change the bar look it might change the look.
Maybe rotate the fairing back more?
Before and after pics below.....
#1924
05-27-2011, 01:18 AM
Extreme HDF Member
Ok gents. Looks like my risers wont be here till next week. Went ahead and raised the fairing up last night. Its up probably a good 2 to 3 inches over what it was before. That and its rotated forward more.
Be honest. What do you think?
Maybe i got used to the way it was before as it has been on there over a year, but im not sold on it being raised up just yet.......Maybe when i get the risers in and change the bar look it might change the look.
Maybe rotate the fairing back more?
Before and after pics below.....
Be honest. What do you think?
Maybe i got used to the way it was before as it has been on there over a year, but im not sold on it being raised up just yet.......Maybe when i get the risers in and change the bar look it might change the look.
Maybe rotate the fairing back more?
Before and after pics below.....
#1925
05-27-2011, 06:49 AM
Road Master
Yeah it actually does. I mean we are not talking windshield type blocking, but a hell of a lot better than what it was....
My best new Mod starts at 4 today. That starts another 1200 mile weekend. Miles on a bike are the best mods you can have. At 12,000 now, 20,000 by end of summer is the goal.....maybe 25k.......
Will also be a good test to see if the fairing does deflect a lot more raised up.....
My best new Mod starts at 4 today. That starts another 1200 mile weekend. Miles on a bike are the best mods you can have. At 12,000 now, 20,000 by end of summer is the goal.....maybe 25k.......
Will also be a good test to see if the fairing does deflect a lot more raised up.....
Last edited by Warrior Redleg; 05-27-2011 at 07:45 AM.
#1926
05-27-2011, 08:02 AM
Cruiser
I think they came off super glide, any 06 or later should work. I contacted a guy off of here that was selling parts off his glide and he sold them for $35.
#1929
05-27-2011, 08:09 PM
#1930
05-28-2011, 12:24 AM
51676-97A
punch that number in on ebay, Thumb screw. i use it to replace the rear pillion post when riding solo, i then purchased a fender bib and use the small chrome phillips head screw that goes at the back of the pillion for the back end of the bib.
or you could make your own decorative thumb screw.
punch that number in on ebay, Thumb screw. i use it to replace the rear pillion post when riding solo, i then purchased a fender bib and use the small chrome phillips head screw that goes at the back of the pillion for the back end of the bib.
or you could make your own decorative thumb screw.