2010 Wide Glide Owners - Let's keep track of our mods....
#171
Could you be so kind to share a copy of the instruction sheets (in pdf format) as a contribution to the ***H-D Instruction sheets database***??
Thanks in advance,
___________
FXD2003Rider
Thanks in advance,
___________
FXD2003Rider
The local HD dealer copied them for me and printed them out. I have them at work(I think), so today I'll look for them, bring them home, copy them and then send the post. That work?
#172
I like the pipes. I was going to get these in black, however my dealer said it would take the new air cleaner set-up along with a new fuel management system. What are the parts numbers for the added parts; if you don't mind?
#174
Join Date: Feb 2007
Location: Harmelen (The Netherlands, Europe)
Posts: 9,002
Received 876 Likes
on
584 Posts
Your help is much appreciated!
___________
FXD2003Rider
#175
I like the pipes. I was going to get these in black, however my dealer said it would take the new air cleaner set-up along with a new fuel management system. What are the parts numbers for the added parts; if you don't mind?
70222-96B Chrome Switch Housing Kit
45075-08 Chrome Levers
56443-00A Hand Grips
50978-99 Pegs Small
50976-99 Pegs Large
49254-99 Shifter Peg
42629-00 Back Break Pad
60792-06B Chrome Inner Primary
60782-06 Chrome Outer Primary
25369-01B Chrome Cam Cover
37116-06 Chrome Trans Side Cover
29406-08 SE Stage 1 Air Cleaner Kit
26013 V&H Big Radius
#176
So, since learning HD's part numbering system, the air cleaner kit was actually made for the 2008 model. Interesting!!
The V&H site offers a fuel management set-up as well as HD recomending an ECM calibration.
Did your dealer not recomend it or did you not know?
The V&H site offers a fuel management set-up as well as HD recomending an ECM calibration.
Did your dealer not recomend it or did you not know?
#178
Could one of you guys/gals do me a favor and pull off your tank console and take some pics of the way the ignition switch is mounted and the underside of the console. You just have to take 1 screw for the seat and 3 for the console, it is not hard at all. Would be appreciated. I posted a thread, but I thought I would ask here as well.
Thanks
CB
Thanks
CB
#179
I guess this would cover it then. Something in the back of my mind tells me that someone(probably at the HD shop) said they didn't know if the factory ECM would be adjustable enough to be recalibrated to match what was needed for the pipes and cleaner. Please let me know in the next 1000-1500 miles if there is a problem(may not even show anything in that short of time period).
Thanks for the info though!!
#180
Actually the pipes I was looking at were the #48003 2 into 1 black