dirt track bars on FXDB
#1
dirt track bars on FXDB
I just got some nightster bars and put them on my street bob. I took off the front turn signals in the process (thinking about leaving them off). I have only see this mod on one other members sig pic. is this a common thing, or are most going with bigger apes or drag bars?
#3
#5
Cables are just re-routed, the throttle cables stick out forward and the clutch cable you can see in the pic has a large loop. i'm not sure how I like the cables being so long, but I didn't want to spend any money on shorter cables at this time.
- as far as the ride is concerned. it's awesome, the bike handles well anyway's, but now I feel more on top of it, and I feel like I can push harder and get better response in the corners. I'm not sure how it'll be on a long tip yet as i've only had it around town and on back roads. i'll probably do a 100 mile run just to see how it feels.
- as far as the ride is concerned. it's awesome, the bike handles well anyway's, but now I feel more on top of it, and I feel like I can push harder and get better response in the corners. I'm not sure how it'll be on a long tip yet as i've only had it around town and on back roads. i'll probably do a 100 mile run just to see how it feels.
#7
Trending Topics
#10
I've been thinking of doing the same myself for a couple of reasons. First, I think the Wild 1's I have may be bringing back an old shoulder problem after a couple of hours. (I am aged). The other, is I like the look. In fact, today I was at the dealer sitting on some bikes to get a feel for different bars and those nightsters seem just right. Not crazy to have to undo the internal wiring, but it will help me with that need to just never leave well enough alone.