Fat Bob Tri Bar LED install ??
#1
Fat Bob Tri Bar LED install ??
I'm kicking around the idea of going with the HD tri bar led. How difficult of an install is it? Do you need a jack? Do you have to remove the rear fender?
Also thinking about Progressive 412's - 11" based on some reading here. I know the shocks will lower at the seat, but do they also bring the back of the fender down too?
Anyone running both if you have any pics, please post. Thanks!!
Also thinking about Progressive 412's - 11" based on some reading here. I know the shocks will lower at the seat, but do they also bring the back of the fender down too?
Anyone running both if you have any pics, please post. Thanks!!
#2
If you have ever take a turn and scraped the pavement with your foot pegs or any other part like the sole of your shoe,or pipes imagine what an inch or so lower will cause. Also lowering may bring your drive belt closer to the tire. That's what i was warned about when inquireing.
LED taillight kit the instructions will be in the box! awful pricey for what you get out of it if you ask me! And of course only if you ask
LED taillight kit the instructions will be in the box! awful pricey for what you get out of it if you ask me! And of course only if you ask
Last edited by maddghost; 05-30-2009 at 06:14 PM.
#3
#4
#5
#6
Like Nytro B says. I did mine and it was easy. Just take your time and be carefull when you remove and replace the fender. Have a bud over and have him help you when taking the fender on and off to make sure. I pushed the cable further back in the raceway attached to the fender to give more slack in the frame for clipping the electrical harness together. Can be done by yourself. I had my friend there but he could only offer moral support.
Last edited by wood butcher; 07-09-2009 at 10:27 PM.
#7
Trending Topics
#8
Like Nytro B says. I did mine and it was easy. Just take your time and be carefull when you remove and replace the fender. Have a bud over and have him help you when taking the fender on and off to make sure. I pushed the cable further back in the raceway attached to the fender to give more slack in the frame for clipping the electrical harness together. Can be done by yourself. I had my friend there but he could only offer moral support.
Nice bike too
Im not sold on the tri-bar, but so few options and such an ugly stocker... I make take off the stocker and tint most of it..
#10
Like others have said... the install isn't bad. You don't need a jack. You will need to remove the rear fender unless you have extremely tiny hands. Removing the rear feder is easier if you have someone give you a hand so you don't scratch it.
The Tri-Bar taillight should have come stock... looks 100% better.
The Tri-Bar taillight should have come stock... looks 100% better.